Hot 
Three-jaw centrifugal clutch made of aluminum, compatible with your Puch Maxi moped equipped with an E50 engine.
Unlike the original, this centrifugal clutch has three lightweight aluminum plates instead of steel ones. The springs are correspondingly weaker. As a result, the clutch can be considered a direct replacement for the original.
Note: We do not recommend using this clutch with racing kits over 50 cc.
A good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Steel, Aluminum |
| Material addition | Composite materials |
| Ø inside | 12 mm, 14.6 mm |
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Number of springs | 3 pcs |
| Ø outside | 93 mm |
| Thickness | 20.9 mm |
| Area of application | Standard, Original |
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: blue · Number of components: 3 pcs · Ø outside: 8.3 mm · Ø inside: 4.8 mm · Total length: 28 mm · Area of application: Tuning
CHF 17.90
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Number of components: 1 pcs · Ø outside: 116 mm · Color: sand-colored · Thickness: 0.35 mm · Number of fixing points: 4 pcs · Ø inside: 106 mm · Puch OEM number: 349.1.10.349.1
CHF 2.40
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Number of components: 3 pcs · Ø outside: 8.45 mm · Color: red · Ø inside: 4.3 mm · Total length: 26.6 mm · Area of application: Tuning
CHF 17.90
swiing® ingenious clutch springs reinforced (+60%) | Puch E50
Spring design: Pressure spring · Ø wire: 2.05 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Number of components: 3 pcs · Ø outside: 8.45 mm · Color: yellow · Ø inside: 4.3 mm · Total length: 26.9 mm · Area of application: Tuning
CHF 17.90
Explore categories from Clutch
Moped fans also bought
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 19.9 mm · Hole spacing outlet: 42 mm · Number of components: 7 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
CHF 9.90
swiing® revival oil filler plug with sealing ring | Puch E50
Ø External head: 14 mm · Manufacturer: swiing® revival parts · Thread type: M10x1.5 (standard thread) · Material: Steel · Nominal diameter (thread): 10 mm · Drive: Slot · Surface: galvanized (blue) · Screw head: Lens head · Total length: 14.6 mm · Thread length: 6 mm · Number of components: 2 pcs · Puch OEM number: 364.1.10.660.1
CHF 3.90
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Drive: External hexagon · Diameter: 5.9 mm · Width across flats: 10 mm · Total length: 106 mm · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
CHF 7.40
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Thickness: 1 mm · Ø outside: 116 mm · Material: Sealing paper · Color: sand-colored · Number of fixing points: 4 pcs · Ø inside: 106 mm · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
CHF 3.90
Working late? Evening hours on Thursday until 20:00
