Special nut for mounting the variator unit on the crankshaft of Piaggio Ciao, Si, Bravo, Boxer mopeds / mopeds.
The nut has a shoulder on the underside. This fits perfectly into the guide bushes of the variator unit.
With the help of this nut, the variator unit is perfectly centered on the crankshaft.
Thread: M8x1.25 mm
Wrench width: 24 mm
Thickness: 6 mm
Material: Steel, galvanized
Figure 3 is for illustration purposes only.
Exceptional product for the highest demands of the quality brand swiing®.
Original Piaggio spare part number: 131331
Details
Width across flats SW | 24 mm |
Drive | External hexagon |
Height | 6 mm |
Manufacturer | swiing® ingenious parts |
Material | Steel |
Surface | blue galvanized |
Thread type | M8x1.25 (standard thread) |
Suitable for the following models
Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
Oil seal 13/22/4 A gearbox Vario original | Piaggio Ciao, SI, Bravo, Boxer
Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Width: 4 mm · Ø inside: 13 mm · Ø outside: 22 mm
CHF 4.70
swiing® revival locking plate nut Variomatic Inox | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: blank · Ø inside: 8.15 mm · Number of lobes: 1 pcs · Ø outside: 33.5 mm · Area of application: Original · Area of application: Standard
CHF 3.40
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
CHF 8.75
Mazzucchelli crankshaft "Racing" 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Mazzucchelli · Weight: 698 g · Material: Steel · Cheek type: standard · Ø coupling pin / vario pin: 12 mm · Crankshaft stroke: 43 mm · Ø piston pin (B): 10 mm · Connecting rod length center-center: 87 mm · Total length crankpin ignition side: 90 mm · Total length crankpin ignition side: 106 mm · Ø crank webs: 69.7 mm · Thread type: M8x1.25 (standard thread) · Ø Connecting rod eye: 13 mm · Bearing seat right: 15 mm · Ø Bearing seat (ignition side): 15 mm · Thread length: 16 mm · Dimension needle bearing: 10 / 13 x 14.2 mm (axe 10) · Wide crank webs: 33 mm · Length 1st paragraph: 21 mm · Length 2nd paragraph: 44 mm · Length 3rd paragraph: 63.5 mm · Area of application: Racing · Ø 1st step (on the coupling side): 15 mm · Ø 2nd shoulder (on the clutch side): 14.4 mm · Ø 3rd step (on the clutch side): 12 mm · Inlet control time: 139 ° · Control time before O.T: 81 ° · Control time according to O.T: 58 ° · Number of gears: 1 pcs
CHF 149.90
swiing® revival locking plate nut Variomatic Inox | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: blank · Ø inside: 8.15 mm · Number of lobes: 1 pcs · Ø outside: 33.5 mm · Area of application: Original · Area of application: Standard
CHF 3.40
swiing® revival spacer sleeve Ø 12x22x9.5 mm Variomatic Inox | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Nominal diameter: 12 mm · Total length: 9.5 mm · Ø inside: 12.05 mm · Ø outside: 22 mm · Piaggio spare part no.: 103241
CHF 6.90