Special holding tool that simplifies work on the clutch or the ignition on your moped, moped and small motorcycle.
The matching bolt is pushed into the upper connecting rod eye and the plastic plate is used to cover the opening to the engine housing. When working on the flywheel, the bolt will then rest cleanly on the plate and the nut can be loosened and tightened without any problems.
The second picture serves to illustrate this.
With this simple tool, you save yourself the purchase of various different counterholders and have the right assembly tool to hand for all engines.
Alternative counterholders can be found under accessories.
Exceptional product for the highest demands of the quality brand swiing®.
Details
Manufacturer | swiing® ingenious parts |
Number of components | 4 pcs |
Material | Plastic |
Diameter | 10 mm, 12 mm, 15 mm |
Accessories & related products
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Manufacturer: swiing® ingenious parts · Area of application: Special tool · Material: Steel · Surface: blue galvanized · Surface: rubberized · Number of components: 1 pcs · Total length: 290 mm · Height: 80 mm · Thickness: 5 mm · Diameter: 19 mm · Ø inside: 27 mm · Ø outside: 93 mm · Ø Pin: 8 mm
CHF 47.90
CHF 59.90
Moped fans like you also bought:
EBR fork reinforced black | Puch
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: black · Adjustable: No · Ø spars: 28 mm · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Head tube length: 180 mm · Total length: 580 mm · Fork bridge - center wheel axle: 381 mm · Distance brake cam to wheel axle center-center: 40 mm · Thread type: MF26x1 (fine pitch thread) · Thread length: 57 mm
CHF 132.00
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Camouflaged: No · Material: Aluminum · Color: black · Carburetor type: PHBG CS · Nominal diameter: 19 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5 · Nozzle size: 75 · Size of secondary nozzle: 45 · Mounting type: Plug connection clamped · Total length: 82 mm · Width: 70 mm · Height: 124 mm · Area of application: Racing · Area of application: Tuning
CHF 119.90
CHF 139.90
Speedometer drive 17" right
Manufacturer: Quenching · Material: Metal · Material: Plastic · Color: black · Place of use: right · Wheel size [inch]: 17 " · 4-edge speedometer cable: 2.3 mm · Ø outside: 47.5 mm · Ø mounting hole: 12 mm · Ø axle: 12 mm · Thread type: MF10x1 (fine pitch thread) · Overall width outside: 54.6 mm · Total height: 51.2 mm
CHF 19.90
Spotlight round Ø 13 cm chrome
Test mark: none · Housing material: Sheet metal (steel) · Lens material: Plastic · Surface: chrome-plated · Color: Chrome · Color: transparent · Bulb holder: BA15d · Tension: 6 V · Tension: 12 V · Speedometer recording: None · Switch included: No · Battery operated: No · Ø outside: 130 mm · Ø External connection: 12 mm · Width: 135 mm · Height: 146 mm · Depth: 80 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Thread size: M6 · Area of application: Standard
CHF 25.90
Handlebar fork plate 30 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Fork plate · Clamping diameter: 22 mm · Fork plate holder length: 90 mm · Ø outside: 22 mm · Height: 270 mm · Length handlebar ends: 155 mm · Width: 680 mm · Crossbar: Yes
CHF 32.80