Very useful tool for fixing the flywheel.
The flywheel stopper can be used on all Bosch and Ducati flywheels, as well as those with the same masses.
Stable construction made of galvanized steel. Comfortable rubber grip.
Ø outer plate: 93 mm
Ø inner plate: 51 mm
Pin spacing: 68 mm
Ø pins: 8 mm
Pin length to heel: 5.5 mm
Figure 3 shows the application of the tool.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Ø inside | 27 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | blue galvanized, rubberized |
| Diameter | 19 mm |
| Ø Pin | 8 mm |
| Height | 80 mm |
| Total length | 290 mm |
| Thickness | 5 mm |
| Ø outside | 93 mm |
| Area of application | Special tool |
| Number of components | 1 pcs |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 535 |
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Accessories & related products
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Cone length: 28 mm · Cone ratio: 1:5 · Ø Flywheel outside: 71.5 mm · Thread type: MF27x1 LH (fine/left-hand thread)
CHF 95.90
Bosch flywheel clockwise NOS | Puch E50
Manufacturer: BOSCH · Thread type: MF26x1.5 (fine pitch thread) · Material: Steel · Direction of rotation: right · Cone ratio: 1:5 · Thread length: 6.5 mm · Ø cone small inside: 11.9 mm · Ø cone large inside: 15 mm · Cone length: 17.8 mm · Height: 36.6 mm · Ø Internal flywheel: 91.2 mm · Ø Flywheel outside: 115.8 mm · Weight: 900 g
CHF 217.40
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs
Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm
CHF 9.90
CHF 12.00
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Total length: 120 mm · Area of application: (Dis)assembly tool · Surface: blue galvanized · Number of components: 1 pcs
CHF 43.90
CHF 59.90
GPO clutch trigger Sachs 502 / 503 (M27x1.25 / M20x1)
Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Total length: 57 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened
CHF 19.90
CHF 29.90
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Manufacturer: swiing® revival parts · Area of application: Special tool · Material: Aluminum · Material: Steel · Surface: anodized · Surface: blue galvanized · Number of components: 4 pcs · Height: 16 mm · Ø inside: 64 mm · Ø outside: 75 mm · Thread type: M6x1 (standard thread) · Thread length: 40 mm · Sachs spare part no.: 0276 057 000
CHF 29.90
CHF 44.90
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 7 pcs · Total length: 130 mm · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm
CHF 19.90
CHF 29.90
Collection only possible with online purchase and appointment.
