Not so nice 
Converter unit with 100 mm pulleys without bell housing, suitable for your Piaggio Ciao (with adaptations), Si, Bravo and Boxer with variomatic drive.
Please note the following information:
- Pulley: Ø 100 mm, for mounting on a Piaggio Ciao, the pulley must be replaced or turned down to approx. 96 mm.
- The locking plate for the nut on the back of the pulleys should be bent over .
- If you have problems starting the moped, it is worth rubbing the collar of the torque converter with a little thinner to remove the protective coating (this can settle on the starting pads).
- Check whether the torque converter is rubbing against the gearbox cover. If this is the case, replace the shim inside if necessary.
Details
| Manufacturer | 101_Octane |
| Gearbox type | Vario |
| Ø outside | 100 mm |
| Hardness level Counter pressure spring | Standard (30 kg - steel-colored) |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
Hot 
swiing® ingenious pulleys Ø 96 mm | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® ingenious parts · Material: Steel · Material: special bearing bronze · Surface: gas nitrided · Gearbox type: Vario · Ø Outer pulley: 96 mm · Alternative version of the Piaggio OEM number: 103382 · Alternative version of the Piaggio OEM number: 103823 · Alternative version of the Piaggio OEM number: 220923 · Alternative version of the Piaggio OEM number: 220924
CHF 119.90
GPO converter with swiing® pulleys Ø 96 mm | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 96 mm · Manufacturer: GPO · Manufacturer: swiing® ingenious parts · Gearbox type: Vario · Hardness level Counter pressure spring: Standard (30 kg - steel-colored) · Alternative version of the Piaggio OEM number: 104649 · Alternative version of the Piaggio OEM number: 221171
CHF 179.90
Not in stock
GPO converter with swiing® pulleys Ø 96 mm without bell housing | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 96 mm · Manufacturer: GPO · Gearbox type: Vario · Hardness level Counter pressure spring: Standard (30 kg - steel-colored) · Alternative version of the Piaggio OEM number: 104649 · Piaggio OEM number: 104649 · Alternative version of the Piaggio OEM number: 221171 · Piaggio OEM number: 221171
CHF 149.90
Not in stock
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Area of application: Standard · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Total length: 15 mm · Material: Brass · Material: Steel · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Width across flats SW: 7 mm · Thread length: 7 mm
CHF 2.50
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Color: black · Surface: galvanized (blue) · Color: silver · Total length: 175 mm · Number of teeth: 10 pcs · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs · Thread type: M6x1 (standard thread)
CHF 9.90
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm
CHF 9.90
Dell'Orto 16/16 SHA carburetor hand choke
Nominal diameter: 16 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: black · Total length: 82 mm · Carburetor type: SHA · Width: 72 mm · Height: 111 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 21 mm · Nozzle size: 82 · Ø Inside entrance: 16 mm · Ø Internal connection: 19 mm · Area of application: Tuning · Ø Output inside: 16 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No
CHF 69.90
Collection only possible with online purchase and appointment.
