15 mm tuning intake manifold suitable for Puch Maxi S and N mopeds / mopeds that have a 1-speed E50 engine installed.
Massive intake manifold made of aluminium, black anodized.
The CNC-milled intake manifold made of solid material is a testament to the highest precision and best workmanship.
The side cut-outs make it easier to fit the nuts.
Internal diameter: 15 mm
Connection diameter: 19 mm
Height (flange - center hole): 43 mm
Hole spacing: 38 mm
Inlet window: 15 x 20 mm
With the reducing bush 20 / 19 mm in the accessories, you can also fit carburettors with a connection diameter of 20 mm.
Details
| Ø inside | 15 mm |
| Material | Aluminum |
| Surface | anodized |
| Color | black-matt |
| Hole spacing inlet | 38 mm |
| Area of application | Tuning |
| Mounting type | Screws |
| Height flange center hole | 43 mm |
| Ø External connection | 19 mm |
| Number of fixing points | 2 pcs |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Nominal diameter: 15 mm · Width: 50 mm · Height: 95 mm · Manufacturer: swiing · Material: Aluminum · Carburetor type: SRE · Ø fuel hose connection: 6 mm · Ø Internal connection: 20 mm · Area of application: Tuning · Ø Inside entrance: 15 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Total length: 66 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
CHF 79.90
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Ø Bundle: 6 mm · Ø Cable bushing: 2.3 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø outside: 8 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Area of application: Standard · Width across flats SW: 7 mm · Thread length: 7 mm · Total length: 15 mm
CHF 2.50
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Width: 123 mm · Width: 230 mm · Width: 330 mm · Height: 26 mm · Height: 60 mm · Height: 65 mm · Place of use: Frame (+ tank) · Material: Polyvinyl chloride (PVC-U_hard) · Color: black · Color: white · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant
CHF 9.40
Dell'Orto 16/16 SHA carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Area of application: Tuning · Color: black · Carburetor type: SHA (type 4) · Width: 72 mm · Camouflaged: No · Nominal diameter: 16 mm · Height: 111 mm · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 16 mm · Ø Internal connection: 19 mm · Ø Output inside: 16 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Total length: 82 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5 · Nozzle size: 82
CHF 69.90
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm · Total length: 6 mm
CHF 2.00
Hot
15 mm carburetor "Black Edition" tuning camouflaged | Puch
Area of application: Tuning · Material: Aluminum · Color: black · Surface: coated · Carburetor type: SRE · Camouflaged: Yes · Nominal diameter: 15 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 3 N/m
CHF 64.90
Not in stock
Collection only possible with online purchase and appointment.
