Racing cylinder of the Airsal brand for Sachs 504 (with adaptations), 505 & 508 engines, which were installed on Hercules mopeds / mopeds, among others.
Thanks to the large intake, overflow and exhaust, this tuning cylinder provides a significant increase in performance.
The intake manifold is included in the scope of delivery.
Plugs with a long thread must be used.
Technical data cylinder:
- Ø inside intake manifold: 14 mm
- Connection diameter intake manifold: 20 mm
- Ø inside exhaust flange: 20 mm
- Ø connection exhaust flange: 26 mm
- Ø cylinder neck: 50.0 mm
- Stroke: 44 mm
- Bore: 43.5 mm
- Thread for decompressor: M10 x 1.5 mm
Attention: For the Swiss 504 engines (42 mm stroke), the following modifications must be made to the cylinder:
- Adjust cylinder base and gasket as shown in Figure 6.
- The cylinder base must be turned off so that the compression is adjusted again due to the shorter stroke, we recommend setting a crushing edge of 0.8 - 1.0 mm.
- For models with an external clutch lever, the intake must be extended, otherwise the carburettor may touch the clutch lever.
Further parts such as the required spark plug with long thread can be found in the accessories.
Quality product from the Spanish manufacturer Airsal.
Details
| Number of fixing points | 4 pcs |
| Manufacturer | Airsal |
| Material | Cast aluminum |
| Camouflaged | No |
| Area of application | Tuning |
| Surface | sandblasted |
| Crankshaft stroke | 44 mm |
| Nominal diameter | 43.5 mm |
| Ø piston pin (B) | 12 mm |
| Ø cylinder neck | 50 mm |
| Ø Outlet outside | 26 mm |
| Ø Inlet inside | 14 mm |
| Hole spacing inlet | 31 mm |
| Inlet window | 23.8 x 14.8 |
| Hole pattern [mm] | 56 (61) x 56 |
| Thread inlet | M6x1 (standard thread) |
| Decompressor | M10x1.5 |
| Outlet type | clamped |
Suitable for the following models
| Sachs | 504 (ohne Tretwelle) 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 508 - 1 A |
Accessories & related products
NGK B8ES spark plug long thread
Width across flats SW: 21 mm · Manufacturer: NGK · Candle designation: B8ES · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Candle thread type: long · Spark plug socket: M4 · Spark plug socket: SAE · Thread type: MF14x1.25 (fine pitch thread) · Suppressed: No
CHF 6.50
Athena 45 mm cylinder kit incl. mounting parts | Sachs (504), 505, 508
Number of fixing points: 4 pcs · Manufacturer: Athena · Material: Cast aluminum · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Crankshaft stroke: 44 mm · Nominal diameter: 45 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 51.7 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 19.5 mm · Ø Inlet inside: 14.3 mm · Hole spacing inlet: 31.5 mm · Inlet window: 23.4 x 12.6 · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 56 (61) x 56 · Decompressor: M10x1.5 · Outlet type: clamped · Outlet type: straight · Hole spacing outlet: 50 mm · Thread outlet: M8x1.25 (standard thread)
CHF 299.90
Athena 48 mm cylinder kit without mounting parts | Sachs (504), 505, 508
Number of fixing points: 4 pcs · Manufacturer: Athena · Material: Cast aluminum · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Crankshaft stroke: 44 mm · Nominal diameter: 48 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 51.6 mm · Decompressor: M10x1.5 · Outlet type: clamped
CHF 279.90
CHF 329.90
Airsal 14 mm intake manifold angled | Sachs 504, 505
Number of fixing points: 2 pcs · Ø inside: 13.6 mm · Manufacturer: Airsal · Material: Aluminum · Area of application: Tuning · Ø External connection: 20 mm · Hole spacing inlet: 31 mm · Height flange center hole: 56 mm · Mounting type: Screws
CHF 36.90
MLM 15 mm intake manifold Dell'Orto SHA | Sachs 504, 505
Number of fixing points: 2 pcs · Ø inside: 15 mm · Manufacturer: MLM · Material: Steel · Area of application: Tuning · Surface: varnished · Color: black · Ø External connection: 19 mm · Hole spacing inlet: 30 - 32 mm · Height flange center hole: 45 mm · Mounting type: Screws
CHF 79.90
Airsal piston 43.5 mm | Sachs 504 / 505
Manufacturer: Airsal · Nominal diameter: 43.5 mm · Ø outside piston (A): 43.5 mm · Ø piston pin (B): 12 mm · Compression height (C): 25.8 mm · Curvature (D): 4.25 mm · Total piston height (E): 52.2 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1 mm
CHF 49.90
NGK BR8EIX spark plug Iridium long thread
Width across flats SW: 21 mm · Manufacturer: NGK · Candle designation: BR8EIX · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning · Candle thread type: long · Spark plug socket: M4 · Spark plug socket: SAE · Thread type: MF14x1.25 (fine pitch thread) · Electrode material: Iridium · Suppressed: Yes
CHF 26.90
Moped fans like you also bought:
Mushroom air filter foam black, Bing SRE (Ø=20 mm)
Total length: 105 mm · Ø outside: 61 mm · Material: Foam · Material: Metal · Camouflaged: No · Material: Rubber · Area of application: Tuning · Color: Chrome · Color: black · Filter type: Foam · Length rubber part: 65 mm · Length of filter section: 40 mm · Ø Internal connection: 20 mm · Mounting type: Bride · Mounting type: Plug connection clamped
CHF 9.90
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut
CHF 9.90
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Total length: 6 mm · Ø outside: 5 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread length: 4 mm
CHF 2.00
NGK B8ES spark plug long thread
Width across flats SW: 21 mm · Manufacturer: NGK · Candle designation: B8ES · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Candle thread type: long · Spark plug socket: M4 · Spark plug socket: SAE · Thread type: MF14x1.25 (fine pitch thread) · Suppressed: No
CHF 6.50
Bing 85/12/101 carburetor (replica) | Sachs 504, 535
Total length: 48 mm · Width: 50 mm · Height: 100 mm · Material: Aluminum · Camouflaged: No · Area of application: Standard · Nominal diameter: 12 mm · Carburetor type: 85 · Ø fuel hose connection: 6 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Air filter connection thread: M5x0.8 (standard thread) · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Choke control: without choke · Nozzle thread: M4 · Nozzle size: 52
CHF 84.90
CHF 99.90
Collection only possible with online purchase and appointment.
