Choke slide for the Bing SRC 1/9/54A carburetor, which was originally installed on Zündapp Belmondo mopeds,
as well as for the Bing SSN carburetor, which was installed on the old generation Tomos.
Width: 14 mm
Height: 21 mm
Original BING spare part manufactured in Germany in original equipment quality.
Details
| Material | Steel |
| Surface | galvanized |
| Manufacturer | BING |
| Carburetor type | SRC, SSN |
| Height | 21 mm |
| Width | 14 mm |
| Choke control | Hand choke |
Suitable for the following models
| Sachs | |
| Zündapp Belmondo | |
| Tomos |
Accessories & related products
swiing® revival Belleville spring | Bing SRC, SSB, SSE, SSN, 85
Manufacturer: swiing® revival parts · Material: Spring steel · Carburetor type: SRC · Carburetor type: SSB · Carburetor type: SSE · Carburetor type: SSN · Carburetor type: 85 · Ø outside: 11.3 mm · Thickness: 0.75 mm · Pony spare part no.: A2006 · Sachs spare part no.: 0261 018 000
CHF 2.90
BING Intermediate washer Belleville washer Bing SRC, SSB, SSN, SSE, 85
Manufacturer: BING · Material: Steel · Surface: blue galvanized · Carburetor type: SRC · Carburetor type: SSB · Carburetor type: SSE · Carburetor type: SSN · Carburetor type: 85 · Ø outside: 11.2 mm · Pony spare part no.: A1597 · Sachs spare part no.: 0244 109 000
CHF 2.90
BING jet needle Bing SRC, SSB, SSN, SSE
Manufacturer: BING · Carburetor type: SRC · Carburetor type: SSB · Carburetor type: SSE · Carburetor type: SSN · Ø outside: 2 mm · Number of grooves (needle designation): 2 pcs · Number of notches (needle clip): 4 pcs · Total length: 32.5 mm · Pony spare part no.: A1972 · Sachs spare part no.: 0261 006 003
CHF 9.90
Moped fans like you also bought:
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Rubber · Surface: blank · Color: black · Color: silver · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: 18 Catalyst · Carburetor type: 85 · Total length: 12 mm · Ø outside: 2.6 mm · Width: 3.3 mm · Ø outside: 4 mm · Alternative version of the Pony Spare part no.: A4595A · Alternative version of Sachs spare part no.: Bing 47-032
CHF 6.90
Clutch 3-jaw (aluminum) | Puch E50
Material: Aluminum · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Thickness: 20.9 mm · Area of application: Original · Area of application: Standard
CHF 49.90
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Ø inside: 41 mm · Ø outside: 45 mm · Pony spare part no.: A4519 · Sachs spare part no.: 0950 128 000
CHF 2.80
Tank sticker "PUCH maxi N" 204 x 29 mm | Puch Maxi N
Color: Chrome · Color: black · Color: green · Color: white · Width: 204 mm · Height: 29 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Tank (+ frame) · Puch spare part no.: 349.2.20.537.0
CHF 9.90
CHF 13.90
Bearing cone M11x1 mm
Thread type: MF11x1 (fine pitch thread) · Material: Steel · Surface: gas nitrided · Color: graphite colors · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Height: 12 mm · Width across flats SW: 15 mm · Ø outside: 19 mm
CHF 7.90
CHF 11.70
BING revision set float Original Bing SRE, SRC, SRF, SRA
Pony spare part no.: A5634 · Manufacturer: BING · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Color: white · Height: 18 mm · Ø outside: 36.5 mm · Sachs spare part no.: 0281 125 002
CHF 29.90
Collection only possible with online purchase and appointment.
