Chromed side covers for the left and right side suitable for Puch Maxi S mopeds / mopeds with E50 engine.
These frame covers are a higher quality, harder version.
If you want to install these side covers on a Puch Maxi S-2A moped with a 2-speed engine, you will need to remove the right-hand side protection slightly in the area of the clutch cover.
The frame covers are sturdy and offer sufficient space for large pedals. The front connection is also very well done. However, there are small shortcomings, as the space for the fuel hose and the clutch lever is tight. Nevertheless, the covers are easy to fit.
Alternative chain guards and the cheaper but softer side covers can be found in the accessories section.
Original Puch spare part number: 349.4.28.502.2, 349.7.28.503.2 and 349.4.28.603.2 (with adjustments)
Details
| Material | Plastic |
| Color | Chrome |
| Number of fixing points | 6 pcs |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing® revival side protection screw set chrome | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: galvanized (blue) · Color: Chrome · Color: silver · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm · Total length: 48 mm · Total length: 63 mm
CHF 15.00
Moped fans like you also bought:
Not so nice 
Chrome luggage rack | Puch Maxi S
Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 17 " · Total length: 425 mm · Width: 168 mm · Height: 32.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Ø mounting hole: 8.3 mm · Ø mounting hole: 9 mm · Hole spacing: 29 mm
CHF 19.90
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Folding the ends: closed folded · Wheel size [inch]: 17 " · Color: Chrome · Shape of the mudguard: angular · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Mounting type: Nuts & bolts
CHF 34.90
Bumm mirror round Inox
Material: Chrome steel (known as Nirosta®) · Material: Steel · Surface: chrome-plated · Manufacturer: Bumm · Color: Chrome · Thread size: M8 · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Total length: 360 mm · Mirror rod length: 300 mm · Clamping diameter: 22 mm · Thread type: M8x1.25 (standard thread)
CHF 24.90
swiing® revival side protection screw set chrome | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: galvanized (blue) · Color: Chrome · Color: silver · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm · Total length: 48 mm · Total length: 63 mm
CHF 15.00
GPO front mudguard strut 17" chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 17 " · Distance mudguard - center hole: 300 mm · Total length: 305 mm · Outer width: 160 mm · Ø mounting hole: 12.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs
CHF 14.90
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Choke control: Hand choke · Nominal diameter: 15 mm · Nozzle size: 62 · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Total length: 66 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Width: 50 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
CHF 79.90
Hot
swiing® ingenious 15 mm intake manifold camouflaged (Version 2.0) | Puch E50
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 53 mm · Height flange center hole: 43 mm · Total length: 46 mm · Area of application: Tuning
CHF 34.90
Not in stock
GPO Chrome mudguard strut | Puch Maxi S, N
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 17 " · Total length: 240 mm · Distance mudguard - center hole: 197 mm · Distance mudguard - center hole: 231 mm · Outer width: 25.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 8 pcs · Hole spacing: 34 mm · Hole spacing: 40 mm · Ø mounting hole: 6 mm · Wide intake: 53 mm
CHF 22.90
Collection only possible with online purchase and appointment.
