Complete cylinder kit suitable for Victoria MS50 / MS51 small engines.
Can also be installed on Swiss DKW M50 engines by adapting the stud bolts.
High-quality reproduction cylinder including pistons, piston rings, piston pins and piston pin retainers.
You will find the matching gasket set in the accessories section.
Ø Piston: 38 mm
Pin hole pattern: 46 x 46 mm
Distance between pin holes and intake: 33 mm
Ø Exhaust flange: 28 mm
Details
| Number of fixing points | 4 pcs |
| Material | Gray cast iron |
| Displacement | 50 ccm |
| Ø piston pin (B) | 12 mm |
| Hole spacing inlet | 33 mm |
| Nominal diameter | 38 mm |
| Surface | sandblasted |
| Ø Outlet outside | 28 mm |
| Camouflaged | No |
| Hole pattern [mm] | 46 x 46 |
| Area of application | Standard |
| Outlet type | clamped |
Suitable for the following models
| DKW | |
| Victoria |
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Number of components: 1 pcs · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Area of application: (Dis)assembly tool · Width across flats Screw: 19 mm · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8
CHF 9.90
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Temperature resistance (min.): -30 - 220 °C · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
CHF 9.90
CHF 22.00/l
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Material: Brass · Angle: 85 ° · Ø outside: 6 mm · Height: 30 mm · Internal thread: MF6x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Total length: 45.5 mm · Total length: 53.5 mm · Width across flats nut: 8 mm · Pony spare part no.: A2066 · Sachs spare part no.: 0261 132 000
CHF 5.90
Hot 
Leonelli 6V voltage regulator (1A quality)
Width: 27 mm · Height: 15 mm · Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: raw · Tension: 6 V · Type of current: Alternating current (AC) · Performance: 50 W · Ø mounting hole: 6 mm · Mounting type: Screws · Total length: 50 mm
CHF 29.90
BING Intermediate washer Belleville washer Bing SRC, SSB, SSN, SSE, 85
Material: Steel · Surface: blue galvanized · Manufacturer: BING · Ø outside: 11.2 mm · Carburetor type: SRC · Carburetor type: SSB · Carburetor type: SSE · Carburetor type: SSN · Carburetor type: 85 · Pony spare part no.: A1597 · Sachs spare part no.: 0244 109 000
CHF 2.90
Collection only possible with online purchase and appointment.
