Used cylinder cover with 38 mm combustion chamber diameter suitable for the Puch Ur-Maxi S and Ur-Maxi N moped / moped.
An original cylinder head from the CH model with small cooling fins, which is cooled by ambient air (airstream). This head has an M10x1 thread for mounting a decompressor.
Dimension (L x W x H): 13.5 x 12.5 x 5.5 cm
Thread decompressor valve: MF 10 x 1 mm
Used spare part which is in technically serviceable condition, signs of use are to be expected. The cylinder head is sandblasted, the sealing surface should be briefly ground flat for safety reasons.
You can find the matching decompressor valve in the accessories section.
Original Puch spare part number: 349.2.10.401.1
Details
| Total length | 135 mm |
| Width | 125 mm |
| Height | 55 mm |
| Manufacturer | Puch |
| Number of fixing points | 4 pcs |
| Material | Aluminum |
| Surface | sandblasted |
| Area of application | Original |
| Ø cylinder | 38 mm |
| Decompressor | MF10x1 |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Total length: 135 mm · Width: 125 mm · Height: 55 mm · Manufacturer: GPO · Number of fixing points: 4 pcs · Material: Aluminum · Surface: sandblasted · Area of application: Standard · Ø cylinder: 38 mm · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
CHF 32.90
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Number of components: 4 pcs · Area of application: Standard · Ø cylinder: 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
CHF 7.40
swiing® revival 38 mm tuning cylinder CH12 | Puch
Manufacturer: swiing® revival parts · Number of fixing points: 4 pcs · Material: Aluminum · Surface: sandblasted · Area of application: Tuning · Displacement: 50 ccm · Nominal diameter: 38 mm · Outlet type: straight · Camouflaged: Yes · Alternative version of the Puch spare part no.: 349.7.10.105.0
CHF 99.90
GPO cylinder stud bolt set special M6x106 mm galvanized | Puch
Total length: 106 mm · Manufacturer: GPO · Material: Steel · Surface: blue galvanized · Diameter: 7 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Thread length: 15 mm · Thread length: 19 mm · Strength class: 10 · Strength class: 10.9 · Width across flats SW: 10 mm · Alternative version of the Puch spare part no.: 360.1.10.034.1
CHF 19.80
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents [ml]: 450 ml · Gearbox type: Foot control · Area of application: Gearbox lubrication with clutch · Gearbox type: Manual gearshift
CHF 9.90
CHF 22.00/l
swiing® revival stud bolt set M6 x 106 mm | Puch
Total length: 106 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats SW: 10 mm · Alternative version of the Puch spare part no.: 360.1.10.034.1
CHF 7.40
GPO screw set for engine mounting, galvanized | Puch
Storage method: Sack · Manufacturer: GPO · Material: Steel · Surface: blue galvanized · Number of components: 12 pcs · Area of application: Standard · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Color: silver · Screw head: Hexagon · Thread length: 23.5 mm · Shank: Yes · Strength class: 8.8 · Width across flats SW: 13 mm · Dimension storage box: 100 x 90 x 10
CHF 8.90
Athena 38 mm cylinder kit 50 cc camouflaged | Puch
Manufacturer: Athena · Material: Aluminum · Camouflaged: Yes · Area of application: Tuning · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Nominal diameter: 38 mm · Ø cylinder neck: 47.7 mm · Ø outlet inside: 24.4 mm · Inlet window: 22 x 14 · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm
CHF 154.90
swiing® revival nozzle holder 2.20 Bing SRE & SRA
Manufacturer: swiing® revival parts · Material: Brass · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Drive: External hexagon · Ø nozzle holder: 2.2 mm · Total length: 29.5 mm · Nozzle thread: M3.5 · Nozzle block: 2.20
CHF 8.30
Collection only possible with online purchase and appointment.
