Black painted EBR fork with reinforced bars suitable for various mopeds, mopeds and small motorcycles such as Hercules Prima, DKW, KTM, etc.
Be sure to check the dimensions beforehand to see if this fork fits your vehicle.
With clamp for attaching the handlebars to the fork plate.
The bolt for attaching the brake anchor plate is located on the right-hand side, 8 cm above the center of the wheel axle. The bolt has a length of 2.5 cm.
There are two M6 threaded bolts per fork leg to attach the mudguard. The distance between these bolts is adjustable and can be varied from 15 to 50 mm.
Internal diameter head tube (for stem mounting): 22 mm
Head tube length: 19.5 cm
Length from center of wheel axle to lower edge of lower fork crown: 40 cm
Total length: 64 cm
Thread: M26x1
Thread length on head tube: 6 cm
Matching headset kits can be found in the accessories section.
Branded product of the Italian manufacturer EBR.
Details
Manufacturer | EWC |
Material | Steel |
Surface | varnished, chrome-plated |
Color | black, Chrome |
Thread type | MF26x1 (fine pitch thread) |
Adjustable | No |
Spar end distance (center-center) | 145 mm |
Ø outer head tube | 26.1 mm |
Total length | 650 mm |
Ø head tube inside | 22.2 mm |
Head tube length | 195 mm |
Fork bridge - center wheel axle | 410 mm |
Distance brake cam to wheel axle center-center | 80 mm |
Ø spars | 28 mm |
Thread length | 60 mm |
Suitable for the following models
Sachs | |
DKW | |
Hercules |
Accessories & related products
swiing® revival snap ring low control bearing set (version 2.0)
Manufacturer: swiing® revival parts · Height: 7 mm · Material: Spring steel · Surface: blank · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Thickness: 0.6 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
CHF 2.50
GPO steerer tube nut M26x1 closed fork plate chrome
Width across flats SW: 30 mm · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Manufacturer: GPO · Height: 13.8 mm · Area of application: Standard · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Thread depth: 12 mm
CHF 9.90
CHF 12.90
GPO steerer tube nut M26x1 open stem chrome
Width across flats SW: 30 mm · Ø inside: 22.1 mm · Ø outside: 36.5 mm · Manufacturer: GPO · Height: 14 mm · Material: Steel · Surface: chrome-plated · Nut type: Flange nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Thread depth: 11.5 mm
CHF 12.90
CHF 15.90
Moped fans like you also bought:
Handlebar fork plate 30 cm curved with chrome strut
Clamping diameter: 22 mm · Ø outside: 22 mm · Manufacturer: Made in Germany · Width: 680 mm · Height: 270 mm · Material: Steel · Surface: chrome-plated · Color: Chrome · Fork plate holder length: 90 mm · Length handlebar ends: 155 mm · Crossbar: Yes · Mounting type: Fork plate
CHF 32.80
Rubber grommet round 2 cables | Sachs 502, 503, 504 (A1923)
Total length: 7 mm · Ø outside: 12.8 mm · Material: Rubber · Area of application: Standard · Surface: raw · Color: black · Ø Cable bushing: 2.2 mm · Ø Bundle: 10.5 mm · Ø mounting hole: 8.5 mm · Waistband height: 2 mm · Pony spare part no.: A1923 · Sachs spare part no.: 0260 020 000
CHF 4.90
swiing® revival rubber grommet ignition cable | Sachs 503 2AL/2BL/AAL, 535 (A4521)
Ø outside: 10.5 mm · Manufacturer: swiing® revival parts · Material: Rubber · Area of application: Standard · Surface: raw · Color: black · Ø Cable bushing: 5.2 mm · Ø Bundle: 10.5 mm · Ø mounting hole: 8.5 mm · Waistband height: 3 mm · Pony spare part no.: A4520 · Pony spare part no.: A4521 · Sachs spare part no.: 0960 135 000 · Sachs spare part no.: 0960 136 000
CHF 5.90