Blower & shuttering

Large flywheel rubber (from 1975) original | Piaggio Ciao, SI, Bravo, Boxer

Manufacturer: Piaggio · Material: Rubber · Color: black · Total length: 42 mm · Total length: 47 mm · Width: 24 mm · Width: 27 mm · Piaggio spare part no.: 166554

Notched nail Ø 2 mm Nameplate motor | Sachs 502 / 503

Manufacturer: Sachs · Ø External head: 3 mm · Total length: 4.4 mm · Ø Pin: 2 mm

swiing® revival sealing rubber blower cover black | Sachs 50/2, 50/3, 50/4 (A1938)

Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC-U_hard) · Surface: raw · Color: black · Ø inside: 16.95 mm · Ø outside: 22.1 mm · Ø mounting hole: 17 mm · Total length: 7.9 mm · Ø Bundle: 20.5 mm · Waistband height: 2 mm · Material thickness: 7.8 mm · Area of application: Standard · Pony spare part no.: A1938 · Sachs spare part no.: 0260 044 000

Ignition cover Standard | Puch

Material: Steel · Surface: chrome-plated · Ø inside: 125 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Height: 48 mm · Color: Chrome

Ignition cover "Puch" Black Edition

Material: Steel · Surface: varnished · Color: black · Ø inside: 125 mm · Ø outside: 130 mm · Height: 48 mm · Number of fixing points: 2 pcs · Alternative version of the Puch spare part no.: 349.3.10.034.2

Sheet metal screw Ø 4.2x13 cylinder cover / footboard original | Piaggio

Manufacturer: Piaggio · Material: Chrome steel (stainless steel) · Thread type: Sheet metal screw · Total length: 13 mm · Piaggio spare part no.: 008455

Cover plate cylinder cover black | Piaggio, Ciao, SI, Bravo, Boxer

Manufacturer: Made in Italy · Material: Plastic · Color: black · Surface: blank · Width: 63 mm · Height: 90 mm · Total length: 95 mm · Number of fixing points: 2 pcs

Olympia clamp cylinder cover | Piaggio Ciao, SI, Bravo, Boxer

Manufacturer: Olympia · Material: Spring steel · Surface: burnished · Color: black · Total length: 23.9 mm · Width: 16.25 mm · Height: 24 mm · Number of fixing points: 1 pcs

Rubber cap ignition cover | Puch

Material: Rubber · Area of application: Standard · Color: black · Ø mounting hole: 3 mm · Ø outside: 54 mm · Height: 5 mm · Total height: 9 mm · Material thickness: 3 mm

swiing® revival screw set fan wheel Inox | EVO, HPI

Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Thread type: M6x1 (standard thread) · Number of components: 6 pcs · Drive: Slot

Fan cover | Piaggio Ciao, SI, Bravo, Boxer

Manufacturer: Made in Italy · Material: Plastic · Color: black · Ø inside: 120 mm · Total length: 230 mm · Width: 182 mm · Height: 20 mm · Number of fixing points: 4 pcs

Blower wheel sealing washer | Sachs 50/2

Material: Sealing paper · Number of components: 1 pcs · Number of fixing points: 3 pcs · Pony spare part no.: A1836 · Sachs spare part no.: 0250 102 000

Flywheel rubber small up to 1975 | Piaggio Ciao, Bravo, Boxer

Manufacturer: Made in Italy · Material: Rubber · Total length: 42 mm · Width: 23 mm · Color: black · Piaggio spare part no.: 102931

Blower fan seal motor | Beta 521, 512 (A8022, A8784)

Manufacturer: Pony · Material: Sealing paper · Number of components: 1 pcs · Number of fixing points: 4 pcs

swiing® revival emblem "Puch" ignition cover black

Manufacturer: swiing® revival parts · Material: Rubber · Shape: round · Color: black · Puch spare part no.: 349.1.10.036.1

GPO ignition cover chrome "Puch" emblem black | Puch

Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Ø inside: 125 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Height: 48 mm · Color: Chrome · Puch spare part no.: 349.3.10.034.2

swiing ignition cover "Puch" emblem chrome | Puch

Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Ø inside: 125 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Height: 48 mm · Color: Chrome · Alternative version of the Puch spare part no.: 349.3.10.034.2

Fan cover | Piaggio Ciao, SI, Bravo, Boxer

Material: Plastic · Number of fixing points: 4 pcs · Color: black · Piaggio spare part no.: 224091

swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Ø mounting hole: 6 mm · Ø inside: 39 mm · Ø outside: 120 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Height: 13.5 mm · Number of fixing points: 10 pcs · Weight: 87 g

swiing® ingenious fan wheel black (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3

Manufacturer: swiing® ingenious parts · Weight: 116 g · Material: Aluminum · Surface: anodized · Color: black · Ø inside: 39 mm · Ø outside: 110 mm · Height: 25 mm · Ø mounting hole: 6 mm · Number of fixing points: 6 pcs · Ø bolt circle: 48 mm · Alternative version of the Pony Spare part no.: A1026 · Alternative version of Sachs spare part no.: 0211 070 105

Fitting sleeve (Ø 8.4 x 10 mm) Blower cover Sachs 50/2, 50/3, 50/4

Material: Steel · Surface: blue galvanized · Ø outside: 8.4 mm · Total length: 10 mm

Insulation board 2.3 mm for gluing 40 x 50 cm

Manufacturer: Made in France · Color: black · Width: 400 mm · Height: 2.3 mm · Total length: 500 mm

swiing® revival ignition rubber | Zündapp Belmondo (Type 247)

Manufacturer: swiing® revival parts · Material: Rubber · Color: black

Ignition cover black | Tomos

Manufacturer: Tomos · Material: Plastic · Number of fixing points: 2 pcs · Color: black · Tomos spare part no.: 233411

Cover plate cylinder cover chrome | Piaggio Ciao

Material: Steel · Surface: chrome-plated · Total length: 79 mm · Number of fixing points: 1 pcs · Height: 39 mm · Width: 85 mm · Piaggio spare part no.: 114046 · Alternative version of Piaggio spare part no.: 121504

Fan wheel E-Start | Beta 521 (A8786)

Manufacturer: Pony · Material: Plastic · Number of fixing points: 4 pcs · Color: black

swiing® revival fan wheel | Puch Velux X30

Manufacturer: swiing® revival parts · Material: Plastic · Number of fixing points: 4 pcs · Color: black · Puch spare part no.: 320.1.10.072.1

Ignition cover cable starter chrome | Puch

Material: Steel · Surface: chrome-plated · Number of fixing points: 2 pcs · Number of fixing points: 3 pcs · Color: Chrome

swiing® revival cable guide blower cover Inox | Sachs 50/2, 50/3, 50/4

Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel)

Ignition cover Puch (old emblem) chrome

Material: Steel · Surface: chrome-plated

swiing® revival washer Ø 24 mm | Sachs 50/2, 50/3, 50/4, 503 AAL (A1602)

Manufacturer: swiing® revival parts · Ø outside: 24 mm · Thickness: 5 mm · Color: Chrome · Pony spare part no.: A1602 · Sachs spare part no.: A1602 · Sachs spare part no.: 0244 114 000

swiing® revival fitting sleeve blower cover 8.4x7 mm | Sachs

Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Ø outside: 8.4 mm · Total length: 7 mm · Pony spare part no.: A1122 · Sachs spare part no.: 0229 000 000

Flywheel rubber small up to 1975 (1A quality) | Piaggio Ciao, Bravo, Boxer

Material thickness: 5.7 mm · Manufacturer: Made in Italy · Material: Rubber · Total length: 42 mm · Width: 23 mm · Color: black · Piaggio spare part no.: 102931

Clip splash guard original | Piaggio Ciao

Manufacturer: Piaggio · Material: Steel · Number of fixing points: 1 pcs · Color: black

Blower cover small | Motor Beta 521 & 512 (A8013)

Manufacturer: Pony · Material: Plastic · Color: black

Blower cover motor | Beta 521 & 512 (A8011)

Manufacturer: Pony · Material: Plastic · Color: black

Fan cover replica | Sachs 50/2

Material: Aluminum · Number of fixing points: 3 pcs · Alternative version of the Pony Spare part no.: A1019 · Alternative version of the Pony Spare part no.: A2962 · Alternative version of Sachs spare part no.: 0211 068 010 · Alternative version of Sachs spare part no.: 0290 054 001

swiing® revival neck nut M7 fan cover | Puch X30 Velux

Manufacturer: swiing® revival parts · Nut type: Neck nut · Thread type: M7x1 (standard thread) · Drive: External hexagon

Blower guide cap | Sachs 50/2

Material: Aluminum · Number of fixing points: 1 pcs · Pony spare part no.: A1024 · Sachs spare part no.: 0211 069 206

Fan wheel Ducati | Beta 521 & 512 (A8032)

Manufacturer: Pony · Material: Plastic · Number of fixing points: 4 pcs · Color: black

swiing® revival rubber blower cover | Zündapp Belmondo (Type 247)

Manufacturer: swiing® revival parts · Material: Rubber · Color: black

swiing® revival pinion splash guard fan | Zündapp Belmondo (Type 247)

Manufacturer: swiing® revival parts

Fan wheel | Sachs 50/2

Material: Plastic · Number of fixing points: 3 pcs · Alternative version of the Pony Spare part no.: A1026 · Alternative version of Sachs spare part no.: 0211 070 105

swiing® revival sealing rubber blower cover gray | Sachs 50/2, 50/3, 50/4 (A1938)

Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC-U_hard) · Color: gray

Siggnature grille fan cowl aluminum | Puch X30 Velux

Manufacturer: Siggnature · Material: Aluminum · Ø outside: 84 mm · Height: 3 mm

swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo

Ø outside: 120 mm · Manufacturer: swiing® ingenious parts · Height: 13.5 mm · Weight: 87 g · Material: Aluminum · Surface: anodized · Color: black · Ø inside: 39 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs

GPO ignition cover chrome "Puch" emblem gray | Puch

Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Number of fixing points: 2 pcs · Color: Chrome · Puch spare part no.: 349.3.10.034.2

Cover "S" housing cover | Sachs 50/2, 50/3, 50/4 (A3500)

Material: Aluminum · Surface: blank · Color: silver · Pony spare part no.: A3500 · Sachs spare part no.: 0611 002 100

swiing alternator cover aluminum low | Puch X30 NS, NL

Manufacturer: swiing · Material: Aluminum · Number of fixing points: 2 pcs

Protection plug connector | Pony / Cilo Beta 521 (P8130)

Manufacturer: Pony · Material: Plastic · Color: black

Flywheel cover black | Solex 1700, 2200, 3300, 3800

Material: Plastic · Color: black

Plastic fan wheel | Minarelli V1 (108) engine (version 2)

Manufacturer: Minarelli · Material: Plastic · Ø inside: 103 mm · Ø outside: 123 mm · Number of fixing points: 4 pcs · Height: 33 mm · Ø bolt circle: 87 mm · Color: black

swiing® revival angle bracket blower cover Inox | Sachs 50/2, 50/3, 50-AML (A1891)

Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: blank · Total length: 27.5 mm · Height: 12.6 mm · Width: 13.1 mm · Pony spare part no.: A1891 · Sachs spare part no.: 0251 079 000

swiing® revival emblem "Puch" ignition cover gray

Manufacturer: swiing® revival parts · Color: gray · Puch spare part no.: 349.1.10.036.1

Pole wheel cover transparent | Puch E50, Z50, ZA50

Material: Polycarbonate (PC) · Ø inside: 124 mm · Ø outside: 126 mm · Number of fixing points: 2 pcs · Height: 48 mm · Color: transparent

Silencing disk | Beta 521 (A8015)

Manufacturer: Pony · Material: Foam · Color: white

swiing® revival protective cap shift paddle black | Puch X30 Z50

Manufacturer: swiing® revival parts · Material: Plastic · Color: black

Plastic fan wheel | Minarelli V1 engine (version 3)

Manufacturer: Minarelli · Material: Plastic · Ø inside: 103 mm · Ø outside: 123 mm · Number of fixing points: 4 pcs · Height: 38 mm · Ø bolt circle: 87 mm · Color: black

Zündapp engine plate

Shape: rectangular · Number of fixing points: 3 pcs · Height: 29 mm · Width: 40 mm

Spark plug cap | Sachs 50/3 LKH manual transmission

Material: Aluminum · Color: gray