22 mm replica exhaust suitable for Puch Maxi S & N, Puch X30 Sport NS / NL, as well as Supermaxi LG1 / LG2 (if Puch Maxi cylinder is mounted) moped / moped.
The exhaust is a 2-piece, bolted, with corresponding Puch number.
The M7 bolt at the end of the flame tube must be locked with an additional nut, otherwise the nut may loosen and the muffler insert may fall out.
We also recommend replacing the mounted gasket between the flame tube and the muffler. You can find a high-quality replacement product in the accessories section.
Attention: The sound of the replica exhausts can be slightly louder than the originals, which can be remedied by wrapping wool around the muffler. You will find this in the accessories section below.
Original Puch spare part number: 349.1.16.000.2
A quality product made in Portugal.
Details
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Ø outside | 58 mm |
| Total length | 920 mm |
| Ø Flame tube outside | 22 mm |
| Number of fixing points | 4 pcs |
| Exhaust type | Flute |
| Mounting type | Welded lug, Stud bolts & nuts |
| Flame tube attachment | Flange |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Stop nut M7 Inox
Material: Chrome steel (stainless steel) · Nut type: Self-securing nut · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon
CHF 0.70
Moped fans like you also bought:
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Width: 125 mm · Total length: 135 mm · Ø cylinder: 38 mm · Height: 55 mm · Area of application: Standard · Number of fixing points: 4 pcs · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
CHF 32.90
swiing nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
CHF 15.90
GPO 44 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Material: Aluminum · Width: 125 mm · Total length: 135 mm · Manufacturer: GPO · Camouflaged: Yes · Surface: sandblasted · Ø cylinder: 44 mm · Number of fixing points: 4 pcs · Height: 55 mm · Candle thread: short · Area of application: Tuning · Hole pattern [mm]: 44 x 44 · Decompressor: No
CHF 42.90
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Material: Aluminum · Width: 50 mm · Carburetor type: SRE · Height: 95 mm · Total length: 66 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mounting type: Plug connection clamped · Area of application: Tuning · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
CHF 79.90
Hot
swiing® ingenious 15 mm intake manifold camouflaged (Version 2.0) | Puch E50
Total length: 46 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Mounting type: Screws · Area of application: Tuning · Height flange center hole: 43 mm · Total height: 53 mm · Hole spacing inlet: 38 mm · Camouflaged: Yes
CHF 34.90
Collection only possible with online purchase and appointment.
