Cost-effective racing exhaust suitable for your Puch Maxi S / N, Puch X30 Sport NS / NL, as well as Puch X30 NG-2AH moped / moped with straight outlet.
The Bullit exhaust system provides a good performance increase for souped-up original cylinders and smaller racing cylinders.
The muffler impresses with its good workmanship. Thanks to the silver silencer and the bare steel muffler, which has been coated with clear lacquer, the resonance exhaust looks really sporty and is an absolute eye-catcher.
Ø flame tube: 28 mm
Material: steel
Surface: painted (colorless)
Further exhaust-specific material can be found in the accessories section.
A quality product made in Portugal.
Details
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | varnished |
| Mounting type | Welded lug |
| Flame tube attachment | Flange |
| Number of fixing points | 3 pcs |
| Ø Flame tube outside | 28 mm |
| Exhaust type | Cone / double cone |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Exhaust Bullet 28 mm chrome | Puch Maxi, X30
Manufacturer: Made in Portugal · Material: Aluminum · Material: Steel · Surface: chrome-plated · Ø outside: 75 mm · Total length: 865 mm · Color: Chrome · Color: silver · Ø Silencer: 60 mm · Ø Internal connection: 24 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 3 pcs · Flame tube attachment: Flange
CHF 54.90
HOMOET Exhaust P6 Special (longer center section) | Puch
Manufacturer: HOMOET · Material: Steel · Surface: blank · Ø outside: 88 mm · Total length: 935 mm · Ø Silencer: 50 mm · Ø Internal connection: 24 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Flange
CHF 294.90
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Reinforced: No · Ø outlet inside: 28 mm · Area of application: Tuning · Ø screw holder: 6.6 mm · Thickness: 3 mm · Ø inside: 27.4 mm · Hole spacing outlet: 42.5 mm
CHF 7.40
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch Maxi, X30 Sport
Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 70 mm · Ø Internal connection: 28 mm · Exhaust type: Cigar · Total length: 730 mm · Mounting type: Screwed clamp · Flame tube attachment: Flange
CHF 119.90
Moped fans like you also bought:
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Total length: 122 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: galvanized (blue) · Ø wire: 2.5 mm · Ø inside: 9 mm · Ø outside: 14 mm
CHF 2.70
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Nominal diameter: 44 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes · Area of application: Tuning
CHF 89.90
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Total length: 113 mm · Manufacturer: GPO · Area of application: Tuning · Color: Chrome · Material: Metal · Material: Rubber · Color: black · Filter type: Grille · Length rubber part: 63.5 mm · Length of filter section: 49 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Ø outside: 61 mm · Camouflaged: No
CHF 13.00
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm
CHF 9.90
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Total length: 19 mm · Manufacturer: swiing® revival parts · Material: Nylon · Color: black · Surface: blank · Bearing type: Plain bearing · Ø Bundle: 24.1 mm · Ø inside: 16.2 mm · Ø outside: 20.2 mm · Puch OEM number: 349.1.42.005.1
CHF 2.50
GPO 44 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Total length: 135 mm · Manufacturer: GPO · Material: Aluminum · Ø cylinder: 44 mm · Width: 125 mm · Height: 55 mm · Surface: sandblasted · Number of fixing points: 4 pcs · Area of application: Tuning · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes
CHF 42.90
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Reinforced: No · Ø outlet inside: 28 mm · Area of application: Tuning · Ø screw holder: 6.6 mm · Thickness: 3 mm · Ø inside: 27.4 mm · Hole spacing outlet: 42.5 mm
CHF 7.40
Collection only possible with online purchase and appointment.
