Slotted Ø 135x16 mm brake pad with return spring for the rear drum brake on your Piaggio moped / moped.
Slotted brake pads enable improved heat and brake dust dissipation, resulting in an increased braking effect. This improved braking power is particularly suitable for daily use, especially with slightly increased performance.
The pad compound corresponds to the AKOA alternative sold on the market. The quality is okay and the brakes fulfill their purpose, but do not reach the level of the swiing® brake pads in terms of braking performance and durability.
Alternative brake pads with an even higher quality pad compound for racing, suitable springs and appropriate cleaning and lubricating agents can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Piaggio spare part number: 414557
Details
| Width | 16 mm |
| Slotted | Yes |
| Manufacturer | GPO |
| Ø drum | 135 mm |
| Number of springs | 1 pcs |
| Area of application | Tuning |
| Springs included | No |
| Ø locating bolt | 8 mm |
| Piaggio spare part no. | 414557 |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
Eurol copper grease 100 g
Temperature resistance (min.): -40 - 1100 °C · Manufacturer: Eurol · Area of application: Chemistry · Area of application: Fat · Contents [g]: 100 g · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Hazard warning: Very toxic to aquatic organisms · Signal word: Danger · Hazard pictogram: GHS09 - Hazardous to the aquatic environment
CHF 11.90
CHF 119.00/kg
Motorex Brake Cleaner 750 ml
Manufacturer: Motorex · Contents [ml]: 750 ml · Area of application: Chemistry · Area of application: Cleaner · Hazard warning: Causes serious eye irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS04 - Gas under pressure · Hazard pictogram: GHS07 - Caution dangerous
CHF 24.90
CHF 33.20/l
Autosol Brake Cleaner 500 ml
Manufacturer: Autosol · Area of application: Chemistry · Area of application: Cleaner · Contents [ml]: 500 ml · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment
CHF 13.90
CHF 27.80/l
swiing® ingenious rear brake shoe Ø 135 x 16 Racing slotted | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® ingenious parts · Area of application: Racing · Ø drum: 135 mm · Color: graphite colors · Color: gray · Number of springs: 1 pcs · Springs included: No · Ø locating bolt: 8 mm · Width: 16 mm · Slotted: Yes
CHF 18.90
Polini brake shoe "Racing" Ø 135 x 16 rear | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Polini · Ø drum: 135 mm · Area of application: High End · Area of application: Racing · Area of application: Tuning · Color: blue · Springs included: No · Width: 16 mm · Slotted: No · Alternative version of Piaggio spare part no.: 414557 · Alternative version of Piaggio spare part no.: 4145574
CHF 20.90
Moped fans like you also bought:
Stand set | Piaggio SI
Manufacturer: Made in Italy · Material: Steel · Color: black · Surface: varnished · Stand base - center mount (A): 225 mm · Total width of stand base (B): 220 mm · Wide receptacle (C): 89 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 265 mm
CHF 24.90
CIF wheel axle set M11x1 x 165 mm front wheel galvanized | Piaggio Ciao, SI, Bravo
Height: 2 mm · Height: 4 mm · Height: 10 mm · Manufacturer: CIF · Material: Steel · Surface: blue galvanized · Surface: galvanized · Thread type: MF11x1 (fine pitch thread) · Ø shaft: 10.3 mm · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Thread length: 73 mm · Shank length: 18 mm · Total length: 165 mm · Ball bearing closed: No · Ø ball [inch] / [mm]: 1/4" (6.35 mm)
CHF 14.90
SKF 6202 C3 ball bearing 15/35/11
Bearing cage: "-" Sheet steel cage ball-guided · Width: 11 mm · Stock number: 6202 · Inner ring width: 11 mm · Manufacturer: SKF · Bearing clearance: C3 · Bearing type: Deep groove ball bearing · Ø inside: 15 mm · Ø outside: 35 mm · Puch spare part no.: 900.4.6202
CHF 9.90
swiing® revival screw set rear wheel hub / gearbox Inox | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Drive: External hexagon · Screw head: Hexagon · Number of components: 12 pcs · Piaggio spare part no.: 016410 · Piaggio spare part no.: 031150
CHF 8.90
swiing® revival clamping screw front brake (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Ø Cable bushing: 2.1 mm · Manufacturer: swiing® revival parts · Number of components: 3 pcs · Material: Steel · Surface: blue galvanized · Thread type: M7x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Ø shaft: 10.9 mm · Width across flats SW: 11 mm · Width across flats SW: 14 mm · Thread length: 9.5 mm · Total length: 21 mm
CHF 5.40
swiing® revival clamping screw rear brake (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Total length: 21.5 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Number of components: 3 pcs · Thread type: M7x1 (standard thread) · Ø shaft: 10.5 mm · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Screw head: Hexagon · Thread length: 11 mm · Width across flats SW: 11 mm · Width across flats SW: 14 mm
CHF 5.80
Collection only possible with online purchase and appointment.
