Clutch plates (2 pieces) for manually shifted Sachs engines.
These clutch plates are a special, slightly thicker version.
We do not know on which models these clutch plates were originally installed. If you can provide us with any further information,
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Manufacturer | GPO |
Area of application | Standard |
Number of slats | 2 pcs |
Thickness | 3.8 mm |
Suitable for the following models
Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) |
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: blue galvanized · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
CHF 2.80
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
CHF 9.90
CHF 22.00/l
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing cage: Brass cage ball-guided · Ø inside: 15 mm · Stock number: E15 · Ø outside: 35 mm · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Bearing type: Shoulder bearing · Width: 8 mm · Ball bearing closed: No · Area of application: Standard · Pony spare part no.: A1149 · Sachs spare part no.: 0232 017 006
CHF 24.90
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Color: sand-colored · Total length: 200 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Width: 130 mm · Thickness: 0.35 mm · Number of components: 1 pcs · Number of fixing points: 6 pcs · Pony spare part no.: A1888 · Sachs spare part no.: 0250 150 000
CHF 5.40
GPO ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing cage: "-" Sheet steel cage ball-guided · Manufacturer: GPO · Bearing clearance: CN (standard) · Material: Steel · Surface: blank / oiled · Bearing type: Deep groove ball bearing · Width: 8 mm · Width: 25.6 mm · Ø inside: 15 mm · Ø outside: 35 mm · Thread type: MF20x1 (fine pitch thread) · Ball bearing closed: No · Area of application: Standard · Pony spare part no.: A2531 · Sachs spare part no.: 0286 079 105
CHF 34.90