&p>Reworked version of the complete 22 mm exhaust system for your Puch Supermaxi LG1, LG2 (cat) moped / moped.
The tuning exhaust, consisting of a 22 mm replica flame pipe, elegant exhaust jacket and high-quality silencer, is fitted with a narrow mounting flange so that it can be mounted on Puch Supermaxi cylinders.
In contrast to the original exhaust, this 2-piece, camouflaged exhaust system has a larger exhaust manifold, which is particularly suitable for a tuned engine setup. The original Puch numbers and the Puch logo are engraved on the exhaust system so that you can enjoy every ride in the finest spy style in everyday life.
Engraved numbers:
345.1.16.500.0
345.1.16.600.0
345.1.16.700.0
The high-temperature resistant silencer is provided with the original numbers, perfectly caulked and equipped with two O-rings to ensure maximum tightness and a pleasant sound level. In addition, the flue insert is precisely centered using a special collar washer and locked with two nuts, making the risk of baffles falling out a thing of the past. A temperature-resistant graphite crush ring ensures an ideal seal between the flame tube and the exhaust sleeve.
Note: The sleeve sits approx. 2 cm further back than normal. To ensure that it can be attached to the exhaust mount, we recommend ordering the extension bracket in the accessories at the same time.
Not suitable for conventional Puch Maxi cylinders.
You can find other exhaust systems and mounting accessories in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) |
Accessories & related products
Exhaust 22 mm | Puch Supermaxi LG1/LG2
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Ø outside: 56.5 mm · Total length: 915 mm · Ø Silencer: 58 mm · Ø Internal connection: 19 mm · Color: Chrome · Ø Flame tube outside: 22 mm · Mounting type: Welded lug · Number of fixing points: 4 pcs · Flame tube attachment: Flange
CHF 74.90
CHF 89.90
Cap nut M4 - M10 Inox
Nut type: Cap nut · Material: Chrome steel (stainless steel) · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon
CHF 0.80
Moped fans like you also bought:
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Rubber · Surface: blank · Color: black · Color: silver · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: 18 Catalyst · Carburetor type: 85 · Total length: 12 mm · Ø outside: 2.6 mm · Width: 3.3 mm · Ø outside: 4 mm · Alternative version of the Pony Spare part no.: A4595A · Alternative version of Sachs spare part no.: Bing 47-032
CHF 6.90
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø inside: 9 mm · Ø outside: 14 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Ø wire: 2.5 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blue galvanized · Total length: 122 mm
CHF 2.70
Collection only possible with online purchase and appointment.
