Black pair of handlebar grips with yellow flame decor.
One set consists of one grip cover with an inner diameter of 22 or 24 mm.
For a manual moped, moped or small motorcycle that requires two grip covers with an inner diameter of 24 mm, you must therefore order two grip sets. The grip ends are closed, but can be opened individually if required (e.g. for mounting a side mirror).
Total length of rubber grip: 125 mm
To make mounting easier, we recommend heating the rubber grip slightly or spraying it with hairspray on the inside.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Manufacturer | GPO |
Material | Rubber |
Color | yellow, black |
Total length | 125 mm |
Ø outside | 50 mm |
Ø inside | 22 mm, 24 mm |
Accessories & related products
Handlebar fork plate 40 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Color: Chrome · Fork plate holder length: 100 mm · Width: 730 mm · Ø outside: 22 mm · Height: 400 mm · Length handlebar ends: 150 mm · Mounting type: Fork plate · Crossbar: Yes · Clamping diameter: 22 mm
CHF 34.90
GPO light switch with wiring harness base chrome version
Width: 30 mm · Manufacturer: GPO · Material: Plastic · Housing material: Steel · Substructure material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 50 mm · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Number of cables: 5 pcs · Number of positions: 3 pcs · Height: 25 mm · Cable length: 970 mm · Cable bifurcation to motor: 970 mm · Cable bifurcation to lamp: 180 mm · Cable bifurcation to switch: 420 mm · Ø Handlebars: 22 mm
CHF 16.90
Moped fans like you also bought:
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 65 ccm · Ø cylinder neck: 48 mm · Camouflaged: Yes · Nominal diameter: 44 mm · Number of fixing points: 4 pcs · Ø outlet inside: 25 mm · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread)
CHF 84.90
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Material: Polyvinyl chloride (PVC-U_hard) · Color: black · Color: white · Place of use: Frame (+ tank) · Width: 123 mm · Width: 230 mm · Width: 330 mm · Height: 26 mm · Height: 60 mm · Height: 65 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant
CHF 9.40
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
CHF 9.90
swiing nozzle set M3.5 (44 - 54) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5 · Nozzle size: 44 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 54
CHF 15.90