Chrome-plated reinforcement bracket for the front fork and for attaching the front mudguard to your moped, moped and small motorcycle.
Fits various forks with tabs for the mudguard mount. Figures 4 & 5 show the mounted pipe bend for illustration purposes.
Compared to the cheaper version, this mounting bracket is of the highest quality.
The mounting bracket for the mudguard has the correct angle so that 17 inch mudguards can be fitted precisely.
In addition, the tube diameter is 14 mm and therefore identical to the original.
Total height of arch: 270 mm
Width (outer edges of flat bar): 115 mm
Hole spacing of side holes: 35 mm
Drilling diameter: 5.9 mm
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Manufacturer | GPO |
Material | Steel |
Surface | chrome-plated |
Wheel size [inch] | 17 " |
Distance mudguard - center hole | 212 mm, 247 mm |
Total length | 270 mm |
Ø outside | 14 mm |
Outer width | 130 mm |
Hole spacing | 35 mm |
Color | Chrome |
Wide intake | 115 mm |
Ø mounting hole | 5.9 mm, 6.4 mm |
Number of fixing points | 6 pcs |
Mounting type | Nuts & bolts |
Suitable for the following models
Puch |
Moped fans like you also bought:
swiing® revival 17" front fender round Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Color: Chrome · Wheel size [inch]: 17 " · Folding the ends: folded · Folding the ends: not folded · Shape of the mudguard: partly round · Total length over ends: 570 mm · Scope: 715 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Total height from support surface to top edge: 185 mm · Mounting type: Nuts & bolts
CHF 34.90
swiing® revival 17" front fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Sprinter
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Color: Chrome · Wheel size [inch]: 17 " · Folding the ends: closed folded · Shape of the mudguard: partly round · Total length over ends: 565 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Total height from support surface to top edge: 185 mm · Mounting type: Nuts & bolts
CHF 54.90
swiing® revival 17" rear fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Sprinter
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Color: Chrome · Surface: polished · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: partly round · Total length over ends: 635 mm · Scope: 1005 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Total height from support surface to top edge: 320 mm · Wheel size [inch]: 17 " · Mounting type: Screws
CHF 69.90
GPO front mudguard strut 17" chrome
Manufacturer: GPO · Material: Steel · Outer width: 160 mm · Color: Chrome · Surface: chrome-plated · Distance mudguard - center hole: 300 mm · Total length: 305 mm · Wheel size [inch]: 17 " · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Ø mounting hole: 12.5 mm
CHF 14.90
swiing® revival 17" mudguard set | Puch X30 NS, NL, NG-2AH, N-2AH, Sprinter
Manufacturer: GPO · Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Color: Chrome · Surface: chrome-plated · Surface: polished · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: partly round · Wheel size [inch]: 17 " · Mounting type: Nuts & bolts
CHF 149.90
swiing® revival front mudguard strut 17" chrome
Manufacturer: swiing® revival parts · Material: Steel · Color: Chrome · Surface: chrome-plated · Distance mudguard - center hole: 300 mm · Total length: 310 mm · Wheel size [inch]: 17 " · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Ø mounting hole: 7 mm · Ø mounting hole: 13 mm
CHF 20.70