Simple tail light in "old-school design" for your moped, moped and small motorcycle.
Very similar to old Hella, ULO or CEV tail lights.
The red reflector glass is embedded in an aluminum frame. A transparent window is embedded at the bottom, which serves as license plate illumination.
Two screws are embedded in the end light for fastening. The rear light can therefore be attached to the mudguard.
Thread: M6
Screw spacing: 60 mm
Light source: BAY15d (One bulb is already installed in the rear light.)
Total length: 100 mm
Total width: 57 mm
Depth: 60 mm
Alternative rear lights and bulbs can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Color | black, red |
| Number of fixing points | 2 pcs |
| Manufacturer | GPO |
| Width | 60 mm |
| Height | 100 mm |
| Material | Aluminum |
| Depth | 60 mm |
| Tension | 6 V |
| Ø Receptacle | 5 mm |
| Bulb holder | BAY15d |
| Battery operated | No |
| Test mark | none |
| Mounting type | Nuts & bolts |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs |
Accessories & related products
GPO tail light ULO | Puch Maxi N, S old version
Width: 60 mm · Height: 110 mm · Number of fixing points: 2 pcs · Manufacturer: GPO · Material: Plastic · Depth: 80 mm · Color: black · Color: red · Ø Receptacle: 4 mm · Tension: 6 V · Bulb holder: BA15s · Battery operated: No · Test mark: none · Mounting type: Nuts & bolts
CHF 36.90
CHF 44.90
GPO rear light Classic chrome with base
Manufacturer: GPO · Test mark: none · Tension: 6 V · Ø Receptacle: 5 mm · Material: Aluminum · Color: Chrome · Color: red · Bulb holder: BAY15d · Width: 60 mm · Depth: 60 mm · Height: 100 mm · Battery operated: No · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
CHF 47.90
Hot 
Rear light ULO | Sachs, Puch
Material: Aluminum · Color: Chrome · Bulb holder: E10 · Battery operated: No · Mounting type: Nuts & bolts · Material: Steel · Test mark: none · Color: red · Number of fixing points: 2 pcs · Ø Receptacle: 5 mm · Tension: 6 V · Depth: 55 mm · Width: 57 mm · Height: 90 mm
CHF 58.70
Not in stock
Moped fans like you also bought:
GPO license plate holder Inox
Width: 105 mm · Height: 5.3 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Manufacturer: GPO · Total length: 145 mm · Material: Chrome steel (stainless steel) · Color: silver · Thread type: M5x0.8 (standard thread) · Hole spacing: 30 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts · Thread length: 8 mm
CHF 10.90
CHF 15.90
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Bearing type: Plain bearing · Ø inside: 16.2 mm · Manufacturer: swiing® revival parts · Ø outside: 20.2 mm · Total length: 19 mm · Material: Nylon · Color: black · Surface: blank · Ø Bundle: 24.1 mm · Puch spare part no.: 349.1.42.005.1
CHF 2.50
swiing® revival wiring harness MERIT light switch (version 2.0) + 20 cm
Area of application: Standard · Switch included: Yes · Luster terminal: Yes · Manufacturer: swiing® revival parts · Cable cross-section [mm²]: 1.5 mm² · Number of cables: 5 pcs · Ø Receptacle: 22 mm · Cable bifurcation to lamp: 240 mm · Cable bifurcation to switch: 600 mm · Cable bifurcation to motor: 950 mm · Tail light cable length: 1000 mm
CHF 39.90
Collection only possible with online purchase and appointment.
