Complete anchor plate for electronic ignition, suitable for Piaggio Ciao, Si, Bravo and Boxer mopeds / mopeds.
This contactless ignition impresses with its high quality and has been extensively tested.
The cable lengths are identical to the factory-fitted ELO ignition from Piaggio.
Technical data:
- Voltage: 12 volts
- Wattage: 90 watts
- Yellow output: light
- Brown output: Brake light (if present)
- Blue output: indicators (if present)
Advantages of the CDI ignition:
- optimal ignition timing at any speed
- always a strong, constant ignition spark
- No more false ignitions
- Possibility to connect several consumers
- no need to adjust the ignition
- Little to no wear and tear
Note: This ignition only fits on the housing, which already had an electronic ignition fitted as standard. Also on racing housings such as the Polini Speed Engine or the Malossi housing for electronic ignitions. When converting your engine with 6V breaker ignition to this 12V ignition, you must also convert the glow plug to 12V and also install a voltage regulator.
You can find a voltage regulator, the right flywheel and other parts for your electric ignition in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Piaggio spare part number: 219965
Details
| Ø inside | 29.5 mm |
| Ø outside | 105 mm |
| Manufacturer | GPO |
| Tension | 12 V |
| Performance | 90 W |
| Cable length | 400 mm, 100 mm |
| Number of cables | 6 pcs |
| Hole spacing | 34.5 mm |
| Number of fixing points | 3 pcs |
| Piaggio spare part no. | 219965 |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
Hot 
Leonelli 12V voltage regulator (1A quality)
Total length: 50 mm · Ø mounting hole: 6 mm · Manufacturer: Leonelli · Width: 27 mm · Height: 15 mm · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Tension: 12 V · Performance: 100 W · Type of current: Alternating current (AC) · Mounting type: Screws
CHF 34.90
GPO ignition coil CDI | Piaggio Ciao, SI, Bravo, Boxer
Number of fixing points: 2 pcs · Total length: 95 mm · Ø mounting hole: 5.7 mm · Manufacturer: GPO · Height: 35.5 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Color: black · Ø cable holder: 7.9 mm · Cable length: 192 mm · Place of use: External (outside the ignition) · Hole spacing: 33 mm · Mounting type: Screws
CHF 39.90
Polini Speed Engine electronic ignition housing | Piaggio Ciao, SI, Bravo, Boxer
Stock number: 6202 · Total length: 215 mm · Manufacturer: Polini · Width: 175 mm · Height: 104 mm · Material: Aluminum · Surface: sandblasted · Color: silver · Crankshaft stroke: 43 mm · Ignition type: Electronic
CHF 214.50
Moderate Casual 
Flywheel puller | Piaggio Ciao, SI, Bravo, Boxer
Width across flats (trigger): 19 mm · Total length: 36.5 mm · Diameter: 12.9 mm · Manufacturer: Quenching · Pull-off depth inside: 68 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Surface: galvanized · Number of components: 2 pcs · Thread type: MF17x1 (fine pitch thread) · Width across flats Screw: 18 mm
CHF 11.90
DUCATI ignition coil CDI | Piaggio Ciao, SI, Bravo, Boxer
Number of fixing points: 2 pcs · Manufacturer: DUCATI · Area of application: Original · Area of application: Standard · Color: blue · Place of use: External (outside the ignition) · Mounting type: Screws · Piaggio spare part no.: 214417 · Piaggio spare part no.: 244127 · Piaggio spare part no.: 610324M · Piaggio spare part no.: 2441275
CHF 82.90
GPO Electronic ignition 12V | Piaggio Ciao, SI, Bravo, Boxer
Number of fixing points: 3 pcs · Manufacturer: GPO · Area of application: Original · Area of application: Standard · Light coil voltage: 12 V · Performance: 90 W · Direction of rotation: right · Mounting type: Screws · Piaggio spare part no.: 181103 · Piaggio spare part no.: 219965 · Piaggio spare part no.: 244127
CHF 239.90
GPO flywheel 800 g full cheek shaft electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Weight: 800 g · Material: Aluminum · Thread type: MF17x1 (fine pitch thread) · Direction of rotation: right · Ø Internal flywheel: 106 mm · Ø Flywheel outside: 139.5 mm · Alternative version of Piaggio spare part no.: 181103 · Alternative version of Piaggio spare part no.: 2238183
CHF 134.30
swiing® revival screws set stator galvanized | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 6 pcs · Thread type: M5x0.8 (standard thread) · Screw head: Lens head · Drive: Cross recess · Shank: No · Thread length: 20 mm
CHF 3.90
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
CHF 8.50
CHF 9.90
Hot
Leonelli 12V voltage regulator (1A quality)
Total length: 50 mm · Ø mounting hole: 6 mm · Manufacturer: Leonelli · Width: 27 mm · Height: 15 mm · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Tension: 12 V · Performance: 100 W · Type of current: Alternating current (AC) · Mounting type: Screws
CHF 34.90
GPO ignition coil CDI | Piaggio Ciao, SI, Bravo, Boxer
Number of fixing points: 2 pcs · Total length: 95 mm · Ø mounting hole: 5.7 mm · Manufacturer: GPO · Height: 35.5 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Color: black · Ø cable holder: 7.9 mm · Cable length: 192 mm · Place of use: External (outside the ignition) · Hole spacing: 33 mm · Mounting type: Screws
CHF 39.90
Polini Speed Engine electronic ignition housing | Piaggio Ciao, SI, Bravo, Boxer
Stock number: 6202 · Total length: 215 mm · Manufacturer: Polini · Width: 175 mm · Height: 104 mm · Material: Aluminum · Surface: sandblasted · Color: silver · Crankshaft stroke: 43 mm · Ignition type: Electronic
CHF 214.50
GPO flywheel 800 g full cheek shaft electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Weight: 800 g · Material: Aluminum · Thread type: MF17x1 (fine pitch thread) · Direction of rotation: right · Ø Internal flywheel: 106 mm · Ø Flywheel outside: 139.5 mm · Alternative version of Piaggio spare part no.: 181103 · Alternative version of Piaggio spare part no.: 2238183
CHF 134.30
GPO Electronic ignition 12V | Piaggio Ciao, SI, Bravo, Boxer
Number of fixing points: 3 pcs · Manufacturer: GPO · Area of application: Original · Area of application: Standard · Light coil voltage: 12 V · Performance: 90 W · Direction of rotation: right · Mounting type: Screws · Piaggio spare part no.: 181103 · Piaggio spare part no.: 219965 · Piaggio spare part no.: 244127
CHF 239.90
Collection only possible with online purchase and appointment.
