For the economical repair of damaged or worn threads (of all materials) and as a structural element for thread reinforcement when using materials with low shear strength (e.g. aluminum, aluminum-magnesium alloys). The use of wear-free HeliCoil thread inserts not only repairs the thread, but also increases the thread load-bearing capacity.
Execution:
High-strength, free-running HeliCoil®plus thread inserts made of stainless steel with high wear resistance, low thread friction in tight tolerances, high surface quality as well as corrosion and heat resistance. The flexible design enables even load and stress distribution and thus produces durable screw connections of the highest quality for all operating loads (static, dynamic) with ideal force transmission. Uncomplicated, quick assembly, the result is an internal thread that can be used on both sides.
Complete repair kit for M12 thread sizes in a plastic case.
Application:
1. Drill out the defective thread with the enclosed drill.
2. Check the tap and threaded bolt.
3. Cut the holding thread with the special HeliCoil tap.
4. Turn the thread insert into the holding thread using the installation tool.
5. Remove the tang with the tang breaker
Scope of delivery
- 1 pc. twist drill Ø12.5 mm
- 1 pc. Tap
- 1 pc. Installation tool
- 1 pc. Tang breaker
- 10 pcs. HeliCoil thread insert (1×D)
- 10 pcs. HeliCoil threaded insert (1.5×D)
- 10 pcs. HeliCoil threaded insert (2×D)
- 1 pc. Plastic case 180×165×45 mm (L×B×H)
Note
Exhaustive instructions are included.
Original HeliCoil product from the German manufacturer Böllhoff.
Details
| Ø bore | 12.5 mm |
| Storage method | Suitcase |
| Dimension storage box | 180 x 165 x 45 mm |
| Manufacturer | HeliCoil |
| Material | Chrome steel (stainless steel) |
| Area of application | Workshop accessories |
| Number of components | 30 pcs |
| Thread type | M12x1.75 (standard thread) |
| Total length | 12 mm, 18 mm, 24 mm |
| Nominal diameter (thread) | 12 mm |
| Dimension thread insert | 1D, 1.5D, 2D |
Moped fans like you also bought:
HeliCoil thread repair set M8 (professional tool)
Ø bore: 8.4 mm · Storage method: Suitcase · Manufacturer: HeliCoil · Dimension storage box: 180 x 165 x 45 mm · Area of application: Workshop accessories · Material: Chrome steel (stainless steel) · Surface: coated · Total length: 8 mm · Total length: 12 mm · Total length: 16 mm · Nominal diameter (thread): 8 mm · Dimension thread insert: 1D · Dimension thread insert: 1.5D · Dimension thread insert: 2D · Number of components: 30 pcs · Thread type: M8x1.25 (standard thread)
CHF 79.90
HeliCoil thread repair set M10 (professional tool)
Ø bore: 10.5 mm · Storage method: Suitcase · Manufacturer: HeliCoil · Dimension storage box: 180 x 165 x 45 mm · Area of application: Workshop accessories · Material: Chrome steel (stainless steel) · Total length: 10 mm · Total length: 15 mm · Total length: 20 mm · Nominal diameter (thread): 10 mm · Dimension thread insert: 1D · Dimension thread insert: 1.5D · Dimension thread insert: 2D · Number of components: 30 pcs · Thread type: M10x1.5 (standard thread)
CHF 87.90
HeliCoil thread repair set M2.5x0.45
Storage method: Plastic box · Manufacturer: HeliCoil · Area of application: Workshop accessories · Material: Chrome steel (stainless steel) · Total length: 2.5 mm · Total length: 3.75 mm · Total length: 5 mm · Nominal diameter (thread): 2.5 mm · Dimension thread insert: 1D · Dimension thread insert: 1.5D · Dimension thread insert: 2D · Number of components: 34 pcs · Thread type: M2.5x0.45 (standard thread)
CHF 92.90
HeliCoil thread repair set M2x0.4
Storage method: Plastic box · Manufacturer: HeliCoil · Area of application: Workshop accessories · Material: Chrome steel (stainless steel) · Total length: 2 mm · Total length: 3 mm · Total length: 4 mm · Nominal diameter (thread): 2 mm · Dimension thread insert: 1D · Dimension thread insert: 1.5D · Dimension thread insert: 2D · Number of components: 34 pcs · Thread type: M2x0.4 (standard thread)
CHF 92.90
Collection only possible with online purchase and appointment.
