Racing clutch from HK Tuning suitable for Puch Maxi mopeds with E50 engine.
Suitable for heavily tuned mopeds.
The clutch has special Kevlar linings, reinforced clutch springs and a reinforcement ring.
The scope of delivery includes 3 sets of different weight plates, which can be screwed onto the clutch arms.
This allows the perfect clutch setting to be found for every situation.
Quality product from the Dutch manufacturer HK Clutches.
Details
| Ø inside | 12 mm, 14.6 mm |
| Manufacturer | HK Clutches |
| Area of application | Performance, Racing, High End, Tuning |
| Material | Steel, Aluminum, Chrome steel (stainless steel) |
| Material addition | Composite materials |
| Number of springs | 3 pcs |
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Ø outside | 93 mm |
| Thickness | 21.2 mm |
Suitable for the following models
| Puch | E50 |
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Number of components: 1 pcs · Cable length: 2200 mm
CHF 2.80
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
CHF 9.90
CHF 22.00/l
Polini 24 mm carburetor (hand choke)
Manufacturer: Polini · Area of application: Tuning · Carburetor type: Flat slide valve · Nominal diameter: 24 mm · Mounting type: Plug connection · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5
CHF 149.90
swiing® revival screw set Motor Inox | Puch E50
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Chrome steel (stainless steel) · Surface: blank · Drive: Hexagon socket · Drive: Slot · Screw head: Countersunk head · Screw head: Cylinder head · Puch spare part no.: 900.1216 · Puch spare part no.: 900.1308
CHF 19.90
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Color: Chrome · Material: Plastic · Material: Steel · Color: black-matt · Surface: chrome-plated · Surface: raw · Ignition system: MVT Allumage · Total length: 170 mm · Width: 150 mm · Height: 82 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm
CHF 149.90
Not in stock
swiing® revival thrust washer set Ø 15 / 17 mm | Puch E50
Ø inside: 15 mm · Ø inside: 17 mm · Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: hardened & ground · Ø outside: 22 mm · Ø outside: 24 mm · Thickness: 1.1 mm · Thickness: 1.3 mm · Thickness: 1.5 mm · Thickness: 1.7 mm
CHF 38.70
Rito crankshaft full cheeks with mounted bearings | Puch E50
Manufacturer: Rito · Area of application: High End · Cheek type: Full cheeks · Material: Steel · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Thread length: 10 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Thread type: MF10x1 (fine pitch thread) · Ø Bearing seat (ignition side): 17 mm · Dimension needle bearing: 12 / 15 x 14.2 (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.6 mm
CHF 199.90
Collection only possible with online purchase and appointment.
