Replacement sealing strips for repairing all tubeless tires on your scooter, motorcycle or car.
The rubber strips are part of the complete repair kit for tubeless tires.
This kit and other spare parts can be found in the accessories section.
The repair of tubeless tires is carried out in the following steps:
1. Locate the damage on the tire and remove any foreign matter.
2. Apply rubber solution to the file and clean the damaged area by moving it up and down.
3. Grasp a repair rubber with the gripping tool and push it into the puncture. The rubber strip should still protrude approx. 1 cm.
4. Slowly pull out the gripping tool and cut off the rubber strip as close to the tire as possible
5. Inflate the tire using a CO₂ cartridge
The set contains 5 pieces. Repair rubber strips.
Puncture repair kit for moped / motorcycle tires on the go.
After the repair, the inner tube can be inflated again very easily in seconds using the carbon dioxide filling cartridges.
With matching adapter valve for all moped hoses with TR4 / TR6 valve.
The set contains the following items:
2 patches size 0
1 patch size. 7
3g vulcanizing solution
1 sandpaper
1 valve core TR6 / TR4
1 key valve cap
4 CO₂ cartridges à 16 g
1 cartridge adaptor
1 cartridge cartridge guard
1 instruction
d
Quality product from the Swiss brand IXS.
Details
| Manufacturer | IXS |
| Number of components | 5 pcs |
| Area of application | Workshop accessories |
Accessories & related products
Set for on the go
Manufacturer: Motorex · Manufacturer: Zéfal · Contents [ml]: 56 ml · Contents [ml]: 100 ml · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
CHF 32.90
Not in stock
Moped fans like you also bought:
swiing nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Total length: 6 mm · Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
CHF 15.90
CHF 19.90
Hot 
Exhaust 22 mm 2-piece replica (with number) | Puch
Number of fixing points: 4 pcs · Total length: 920 mm · Ø outside: 58 mm · Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Flame tube attachment: Flange
CHF 64.90
Hot
Leonelli 12V voltage regulator (1A quality)
Total length: 50 mm · Ø mounting hole: 6 mm · Manufacturer: Leonelli · Width: 27 mm · Height: 15 mm · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Tension: 12 V · Performance: 100 W · Type of current: Alternating current (AC) · Mounting type: Screws
CHF 34.90
Cable set cut with adjusting screws | Puch Maxi
Total length: 1200 mm · Total length: 1250 mm · Total length: 1450 mm · Total length: 1830 mm · Manufacturer: Made in Germany · Material: Brass · Material: Steel · Color: black · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Outer shell length: 1120 mm · Outer shell length: 1150 mm · Outer shell length: 1740 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
CHF 34.90
Collection only possible with online purchase and appointment.
