Black Tecno Boss (Fuego) racing exhaust for various Tomos mopeds with straight outlet
.Ø outer flame pipe: 28 mm
The exhaust with double cone ensures more power through resonance.
Details
| Manufacturer | Jamarcol |
| Material | Steel |
| Surface | varnished |
| Color | black |
| Mounting type | Welded lug |
| Ø outside | 70 mm |
| Total length | 770 mm |
| Ø Silencer | 50 mm |
| Ø Internal connection | 25 mm |
| Number of fixing points | 1 pcs |
| Ø Flame tube outside | 28 mm |
| Exhaust type | Cone / double cone |
| Flame tube attachment | Flange |
Suitable for the following models
| Tomos |
Accessories & related products
MOTIP heat-resistant clear lacquer (matt) 400 ml
Manufacturer: MOTIP · Area of application: Paint & varnish · Color: transparent · Contents [ml]: 400 ml · Hazard warning: Causes serious eye damage · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Temperature resistance (min.): 0 - 800 °C
CHF 24.90
CHF 62.25/l
Moped fans like you also bought:
swiing nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA (type 3) · Carburetor type: SHA (type 4) · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Total length: 8 mm
CHF 20.90
Dell'Orto 15/15 SHA carburetor hand choke (with air filter)
Total length: 82 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Width: 70 mm · Carburetor type: SHA (type 4) · Height: 100 mm · Color: black · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Nominal diameter: 15 mm · Mounting type: Plug connection clamped · Ø without reducing sleeve: 21 mm · Nozzle size: 68 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 59 mm · Ø Internal connection: 18 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Racing · Area of application: Tuning
CHF 69.90
Airsal 44 mm cylinder kit tuning 12 mm KoBo | Tomos A35
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Nominal diameter: 44 mm · Displacement: 65 ccm · Ø piston pin (B): 12 mm · Hole spacing inlet: 31.5 mm · Hole spacing inlet: 36 mm · Hole spacing inlet: 39 mm · Ø cylinder neck: 47.4 mm · Number of fixing points: 4 pcs · Ø outlet inside: 22 mm · Inlet window: 29.5 x 37.5 · Thread inlet: M5x0.8 (standard thread) · Hole spacing outlet: 42 mm · Decompressor: No · Outlet type: slanted · Hole pattern [mm]: 44 x 44 · Thread outlet: M6x1 (standard thread) · Area of application: Tuning · Camouflaged: No
CHF 119.90
Not in stock
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Area of application: Tuning · Reinforced: No · Thickness: 3 mm · Place of use: Exhaust · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm
CHF 7.40
Airsal tuning set 44 mm (budget) | Tomos A35
Nominal diameter: 44 mm · Manufacturer: Airsal · Manufacturer: DMP · Manufacturer: Dell'Orto · Manufacturer: GPO · Manufacturer: NGK · Manufacturer: swiing · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning
CHF 359.90
Collection only possible with online purchase and appointment.
