Sport gear set for Puch X30 Velux and Z50 engines of Puch X30 Sport NS / NL mopeds.
Attention: The countershaft is only suitable for primary gears with the 8-split cam mount.
This gearbox has a gear ratio of 11:28 in 1st gear instead of 10:28.
This gearbox has a gear ratio of 11:28 instead of 10:28 in 1st gear.
This racing gearbox has the following advantages:
- Speed increase of 10% in 1st gear
- Better power connection when shifting into 2nd gear, no «t gear, no more «speed hole»
- Speed reduction on very long, steep climbs
Number of gears in 1st gear: 28
Number of countershafts in 1st gear: 11
Number of countershafts in 2nd gear: 16
. Gear: 16
The gear set is also suitable for the models MS50, MS50L, VS50, MV50, MV50S, MV50X-2.
Branded product of the Portuguese manufacturer Jasil under the Top Racing brand.
Details
| Manufacturer | Jasil |
| Material | Steel |
| Surface | Hardened |
| Recording type | Interlocking |
| Toothing type | straight toothed |
| Number of teeth | 11 pcs, 16 pcs, 28 pcs |
Suitable for the following models
| Puch | Z50 (X30 Sport) Z50 (X30 Velux) 2-Gang MS, MV, MV50 |
Accessories & related products
Moped fans like you also bought:
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of fixing points: 6 pcs · Ø inside: 94 mm · Ø mounting hole: 6.7 mm · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 45 pcs · Thickness: 4.5 mm · Hole spacing 2: 68 mm · Hole spacing: 36.5 mm · Ø bolt circle: 105.5 mm · Cranking (offset): 8 mm
CHF 19.90
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Material: Sealing paper · Area of application: Standard · Number of components: 10 pcs · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm
CHF 19.90
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: blue galvanized · Color: silver · Thread type: M8x1.25 (standard thread) · Screw head: Hexagon · Total length: 18 mm · Drive: External hexagon · Drive: Slot · Width across flats Screw: 13 mm · Thread length: 12 mm · Puch spare part no.: 901.1053
CHF 3.50
swiing® ingenious clutch spring reinforced +40% (Version 2.0) | Puch Z50
Spring design: Pressure spring · Ø wire: 4.5 mm · Total length: 23.5 mm · Ø inside: 30 mm · Ø outside: 39 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: red · Number of components: 1 pcs
CHF 23.80
Rito crankshaft Racing (Version 2023) | Puch X30 NS, NL / Velux (Z50)
Manufacturer: Rito · Weight: 913 g · Material: Aluminum · Area of application: Racing · Material: Steel · Area of application: Tuning · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Thread type: MF10x1 (fine pitch thread) · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 58 mm · Total length crankpin ignition side: 67.5 mm · Ø crank webs: 69.8 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 8.5 mm · Thread length: 12 mm · Dimension needle bearing: 12 / 15 x 14.7 mm (axe 12) · Wide crank webs: 34.3 mm · Length 1st paragraph: 19 mm · Length 2nd paragraph: 18.5 mm · Ø 1st step (on the coupling side): 17 mm · Ø 2nd shoulder (on the clutch side): 15 mm · Length of shoulder (ignition side): 18 mm · Number of gears: 2 pcs · Puch spare part no.: 349.1.10.215.0 · Puch spare part no.: 350.7.10.015.0
CHF 199.90
CHF 219.90
Collection only possible with online purchase and appointment.
