Not so nice 
Center stay (stay) suitable for Puch Maxi S / P1, Puch X30 NS / NL / NG mopeds and mopeds.
The chrome-plated center stay requires minor adjustments in the area of the stop plates.
Total height (A): 20 cm
Spring nipple height (B): 12 cm
Width of base (C): 4.5 cm
Width of mount (D): 6.7 cm
Mäsig-läsig! – We strive to offer you the widest range of moped spare parts. However, this product is of rather poor quality and is not recommended by us. Should you nevertheless choose this item, we understand, but cannot offer you any guarantee or exchange.
The high-quality alternative, as well as corresponding add-on parts such as strut springs, bearing shells, etc. can be found in the accessories section.
Details
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Wide receptacle (C) | 67 mm |
| Spring nipple distance - center pivot axis (E) | 120 mm |
| Wide upright foot (F) | 45 mm |
| Total height | 200 mm |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) |
Accessories & related products
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: galvanized (blue) · Total length: 122 mm · Ø outside: 14 mm · Ø inside: 9 mm
CHF 2.70
swiing® revival stand spring Inox | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Manufacturer: swiing® revival parts · Length spring hook: 19 mm · Length spring hook: 53 mm · Material: Chrome steel (stainless steel) · Ø outside: 14 mm · Ø inside: 9 mm · Surface: raw · Total length: 122 mm
CHF 5.90
Solid galvanized main stand | Puch Maxi S
Manufacturer: Made in Switzerland · Material: Steel · Surface: chrome-plated · Stand base - center mount (A): 210 mm · Total width of stand base (B): 275 mm · Wide receptacle (C): 86 mm · Ø Receptacle (D): 10 mm · Spring nipple distance - center pivot axis (E): 115 mm · Wide upright foot (F): 30 mm · Wide upright foot (F): 70 mm · Total height: 220 mm · Color: Chrome
CHF 98.90
swiing® revival screw set mounting stand Inox | Puch
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: raw · Area of application: Standard · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Thread length: 17.5 mm · Shank: Yes · Number of components: 12 pcs · Color: silver
CHF 6.90
Buzzetti main stand black (1A quality) | Puch Maxi S, P1 | X30 NS, NL, NG
Manufacturer: Buzzetti · Material: Steel · Color: black · Surface: powder-coated · Stand base - center mount (A): 200 mm · Total width of stand base (B): 230 mm · Wide receptacle (C): 63 mm · Ø Receptacle (D): 18.1 mm · Spring nipple distance - center pivot axis (E): 100 mm · Wide upright foot (F): 30 mm · Wide upright foot (F): 45 mm · Total height: 215 mm · Puch OEM number: 349.3.24.500.2
CHF 63.70
Buzzetti main stand extended black (1A quality) | Puch Maxi S, P1 | X30 NS, NL, NG
Manufacturer: Buzzetti · Material: Steel · Color: black · Surface: powder-coated · Stand base - center mount (A): 225 mm · Total width of stand base (B): 235 mm · Wide receptacle (C): 63 mm · Ø Receptacle (D): 18.5 mm · Spring nipple distance - center pivot axis (E): 100 mm · Wide upright foot (F): 30 mm · Wide upright foot (F): 50 mm · Total height: 240 mm · Puch OEM number: 321.2.24.001.2
CHF 63.70
Moped fans like you also bought:
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: galvanized (blue) · Total length: 122 mm · Ø outside: 14 mm · Ø inside: 9 mm
CHF 2.70
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Color: Chrome · Surface: polished · Folding the ends: closed folded · Shape of the mudguard: angular · Mounting type: Nuts & bolts · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Wheel size [inch]: 17 "
CHF 34.90
BOSCH Breaker with cable | Bosch / Ducati
Manufacturer: BOSCH · Material: Steel · Ø Internal flywheel: 90 mm · Cable available: Yes · Number of fixing points: 1 pcs · Cable length: 100 mm · Ø axle: 4 mm · Area of application: Original · Area of application: Standard · Ø mounting hole: 4.5 mm · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · Pony OEM number: A4607 · BOSCH OEM number: 1 217 013 025 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · BERU OEM number: 0 340 100 710 · Sachs OEM no.: 0283 116 102
CHF 19.80
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Camouflaged: No · Component group Carburetor: Sealing, revising · Material: Sealing paper · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Carburetor type: SRE · Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm
CHF 4.90
swiing® revival stand spring Inox | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Manufacturer: swiing® revival parts · Length spring hook: 19 mm · Length spring hook: 53 mm · Material: Chrome steel (stainless steel) · Ø outside: 14 mm · Ø inside: 9 mm · Surface: raw · Total length: 122 mm
CHF 5.90
GPO pedal cranks chrome (pair) | Puch
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Thread type: FG14.3 (9/16" 20G) · Total length: 180 mm · Crank length (center-center): 156 mm · Wide intake: 28 mm · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm
CHF 74.90
DUCATI ignition coil (1A quality)
Manufacturer: DUCATI · Area of application: Original · Area of application: Standard · Color: black · Ø cable holder: 5.9 mm · Ø Internal flywheel: 90 mm · Mounting type: Screws · Cable length: 37 mm · Total length: 76.5 mm · Place of use: Internal (in the ignition) · Hole spacing: 54 mm · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Height: 17 mm · Pony OEM number: A2114 · Alternative version of the Pony OEM number: A2116 · Alternative version of the Pony OEM number: A2118 · Pony OEM number: A5524 · Alternative version of the Sachs OEM number: 0265 142 002 · Alternative version of the Sachs OEM number: 0265 142 004 · Sachs OEM no.: 0265 132 100 · Sachs OEM no.: 0265 203 001
CHF 64.90
Collection only possible with online purchase and appointment.
