Parts from Magura
Magura - High-quality clutch levers and gear levers for the original look on your moped
Handlebar controls from Magura are a must if you want to accentuate the charming vintage look on your moped, but the manufacturer also has a lot to offer for racing and customising.
Sort:
Magura set screw M6x23 mm edged (Ø 2.8 mm) with cross bolt
Drive: External hexagon · Drive: Knurled nut · Drive: Knurled screw · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Manufacturer: Magura · Area of application: Standard · Material: Steel · Surface: blue galvanized · Color: silver · Number of components: 4 pcs · Width across flats SW: 8 mm · Thread length: 15 mm · Total length: 21 mm · Total length: 23 mm
CHF 6.90
Magura set screw M7x42 mm serrated (Ø 4 mm) slotted
Drive: Knurled nut · Drive: Knurled screw · Thread type: M7x1 (standard thread) · Manufacturer: Magura · Shank: No · Area of application: Standard · Material: Steel · Surface: blue galvanized · Color: silver · Number of components: 2 pcs · Thread length: 30 mm · Total length: 42 mm
CHF 7.90
Magura set screw M6x32 mm serrated (Ø 2.8 mm) slotted
Drive: Knurled nut · Drive: Knurled screw · Thread type: M6x1 (standard thread) · Manufacturer: Magura · Shank: No · Area of application: Standard · Material: Steel · Surface: blue galvanized · Color: silver · Number of components: 2 pcs · Thread length: 20 mm · Total length: 32 mm
CHF 6.90
Magura set screw M8x45 mm serrated (Ø 3.5 mm) slotted
Drive: Knurled nut · Drive: Knurled screw · Thread type: M8x1.25 (standard thread) · Manufacturer: Magura · Shank: No · Area of application: Standard · Material: Steel · Surface: blue galvanized · Color: silver · Number of components: 2 pcs · Thread length: 35 mm · Total length: 45 mm
CHF 8.90
Magura set screw M8x55 mm (Ø 4 mm)
Drive: External hexagon · Thread type: M8x1.25 (standard thread) · Manufacturer: Magura · Shank: No · Material: Steel · Surface: blue galvanized · Color: silver · Number of components: 2 pcs · Width across flats SW: 10 mm · Width across flats SW: 11 mm · Thread length: 45 mm · Total length: 55 mm
CHF 6.90
Magura set screw M6x53 mm (Ø 2.5 mm) slotted
Manufacturer: Magura · Material: Steel · Surface: blue galvanized · Color: silver · Thread type: M6x1 (standard thread) · Drive: External hexagon · Total length: 53 mm · Width across flats SW: 10 mm · Thread length: 45 mm · Number of components: 2 pcs
CHF 8.60
Magura cable clamp Ø 8 x 9
Manufacturer: Magura · Material: Steel · Surface: blue galvanized · Surface: chrome-plated · Ø outside: 8 mm · Total length: 9 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Width across flats SW: 7 mm · Thread type: M4x0.7 (standard thread) · Thread length: 5 mm · Ø Cable bushing: 2.5 mm · Number of components: 1 pcs · Area of application: Standard
CHF 2.00
Page 1 of 7
Everything under control with handlebar controls from Magura
After a few years of intensive use, the grips and levers of a moped can look and feel a little worn. If you want to restore or repair your moped and get it in top condition, replacing these components from time to time is simply part of the process. So that you can maintain the original look of your moped, throttle grips and brake levers from the former market leader in handlebar controls are of course a must in our range. But even if the original look is less important to you and quality is the decisive criterion, moped grips, brake levers and gear levers from Magura are always a good choice. These are either manufactured specifically for each model or are available in universally fitting versions.
Top quality and maximum functionality for maximum riding comfort
The quality of its products as well as their high functionality and maximum comfort for two-wheeler riders are at the centre of product development at Magura. If you rely on brake levers, shift levers or grip covers from the manufacturer, you can be sure that you have a firm grip on your moped in the truest sense of the word thanks to the special surface finish. With a Magura gear lever or clutch lever, you are always purchasing a genuine quality product, regardless of whether you opt for an old original part or one of the newer products from the company portfolio of the specialist for handlebar controls. For your moped from Puch, Kreidler, Malaguti and many other manufacturers, you will find the right throttle grips, brake levers and gear levers in modern or classic designs in our range. We also have smaller wear and replacement parts such as return springs, sliding blocks or lever bolts available for you.
Quality for two-wheeler fans for around 100 years
The beginnings of Magura date back to 1893 in the small German town of Bad Urach. The people of the Swabian region are said to have a unique inventive spirit. The inventor Gustav Magenwirth, who later became the founder of Magura, was probably also blessed with this spirit, as he initially developed petrol engines and hydraulic press pumps quite successfully. The company then entered the business of handlebar controls for two-wheelers in 1923. Magura quickly made a name for itself as an original equipment manufacturer for renowned two-wheeler manufacturers at this time. The good reputation and high renown of the manufacturer from those days has survived to this day. However, Magura was and is not only successful as an original equipment manufacturer; the brand's products, from throttle grips to clutch levers, are also in great demand on the aftermarket. The company now produces at several locations in Germany, the USA and Asia. More than 550 employees ensure that you always get the right Magura lever or grip for your motorbike.
Related & alternative part manufacturers
Collection only possible with online purchase and appointment.
