Clutch springs suitable for the KTM SX50 clutch for Puch Maxi mopeds with E50 engine.
Specially developed for racing purposes. Designed for the highest loads.
The set consists of 3 springs and 3 washers.
The clutches engage at approx. 7000 - 9000 rpm, depending on the oil, etc.
In order to change the clutch engagement speed, the enclosed shims can be installed. This increases the clutch engagement speed by approx. 500 rpm.
The springs are made of stainless steel and can withstand temperatures of up to 240 degrees.
You can find other spring strengths in our range.
Details
Spring design | Pressure spring |
Manufacturer | MBR |
Material | Spring steel |
Area of application | Racing |
Color | red |
Number of components | 6 pcs |
Suitable for the following models
Puch | E50 |
Moped fans like you also bought:
swiing® revival set stud bolts M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Diameter: 5.9 mm · Total length: 106 mm · Drive: External hexagon · Width across flats SW: 10 mm · Thread type: M6x1 (standard thread) · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch spare part no.: 360.1.10.034.1
CHF 7.40
Athena 38 mm cylinder kit incl. diaphragm | Puch
Manufacturer: Athena · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Area of application: Tuning · Ø piston pin (B): 12 mm · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 38 mm · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Thread outlet: M6x1 (standard thread)
CHF 199.90
MBR Clutch KTM SX50 | Puch E50
Manufacturer: MBR · Material: Steel · Material addition: Aluminum · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
CHF 342.80