Chrome-plated, adjustable dampers for your moped, moped and small motorcycle.
The hardness or preload of the dampers can be adjusted in five stages thanks to the special spring mount.
Length (mount - mount): 340 mm
Outer diameter of coil spring: 46 mm
Holt diameter: 24 mm
Bush diameter for mounting: 10 / 8 mm
With the plastic bushes supplied, the diameter at the mounting points can be shortened from 10 mm to 8 mm.
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery includes one pair.
Rear springs in other colors, the matching adjustment key, washers and fastening material can be found in the accessories section.
Suspension strut from the MKX-SHOCK brand.
Details
| Manufacturer | MKX |
| Surface | chrome-plated |
| Damping type | Spring |
| Adjustable | Yes |
| Mounting type | Nuts & bolts |
| Ø spars | 24 mm |
| Ø Fastening inside | 8 mm, 10 mm |
| Ø outside | 46 mm |
| Hole spacing | 340 mm |
| Number of fixing points | 2 pcs |
| Color | Chrome |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
MKX shock absorber 34 cm black
Manufacturer: MKX · Surface: varnished · Damping type: Spring · Ø outside: 46 mm · Adjustable: Yes · Color: black · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Ø spars: 24 mm · Number of fixing points: 2 pcs · Hole spacing: 340 mm
CHF 49.90
Moped fans like you also bought:
Not so nice 
Chrome luggage rack | Puch Maxi S
Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 17 " · Total length: 425 mm · Width: 168 mm · Height: 32.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Ø mounting hole: 8.3 mm · Ø mounting hole: 9 mm · Hole spacing: 29 mm
CHF 19.90
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Total length: 6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Thread length: 4 mm · Ø Cable bushing: 1.6 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated
CHF 2.00
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Valve type: TR4 Auto valve · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5
CHF 9.90
Transval speedometer drive 17" with grease nipple
Manufacturer: Transval · Material: Aluminum · Color: gray · Place of use: left · Place of use: right · Wheel size [inch]: 17 " · 4-edge speedometer cable: 1.9 mm · Ø outside: 41 mm · Ø mounting hole: 11 mm · Ø axle: 11 mm · Thread type: MF10x1 (fine pitch thread) · Overall width outside: 60 mm · Total height: 52 mm
CHF 29.90
Collection only possible with online purchase and appointment.
