"Moor" brand plate on the head tube (curved)

Condor brand plate head tube (bent)

Material: Brass · Surface: etched · Shape: curved · Ø mounting hole: 2.5 mm · Number of fixing points: 2 pcs · Height: 61 mm · Width: 42 mm · Mounting type: Rivets

"Tigra" brand plate bent towards the head tube

Material: Chrome steel (stainless steel) · Surface: etched · Shape: curved · Ø mounting hole: 3.9 mm · Number of fixing points: 2 pcs · Height: 57 mm · Width: 42 mm · Mounting type: Rivets

Nameplate | TOUR DE SUISSE LM

Manufacturer: Made in Germany · Total length: 65 mm · Height: 11 mm · Color: black

Nameplate for head tube (curved) black | Pony Junior

Number of fixing points: 2 pcs · Height: 59 mm · Width: 32 mm · Color: black

Notched nail Ø 2 mm Nameplate motor | Sachs 502 / 503

Manufacturer: Sachs · Ø External head: 3 mm · Total length: 4.4 mm · Ø Pin: 2 mm

Nameplate to punch yourself | Sachs Prior

Ø mounting hole: 2 mm · Total length: 44 mm · Number of fixing points: 2 pcs · Height: 9 mm · Color: black

Blank nameplate to punch yourself

Ø mounting hole: 2 mm · Total length: 44 mm · Number of fixing points: 2 pcs · Height: 9 mm · Color: black

Notched nail Ø 2 x 4 mm Inox

Ø Rivet pin: 2 mm · Rivet pin length: 4 mm · Area of application: Standard · Material: Chrome steel (stainless steel) · Surface: blank · Total length: 5.2 mm · Ø bore: 2 mm · Ø External head: 3.5 mm

Karcoma fuel tap M12x1 vertical (with union nut) 2 connections

Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: any · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 50 mm · Mounting type: Union nut

Main stand black | Puch Maxi S, P1 / X30 NS, NL, NG

Material: Steel · Surface: varnished · Stand base - center mount (A): 207 mm · Color: black · Total width of stand base (B): 217 mm · Wide receptacle (C): 66 mm · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 75 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 50 mm · Total height: 220 mm

swiing® revival snap ring low control bearing set (version 2.0)

Nominal diameter: 20 mm · Nominal diameter: 28 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Thickness: 0.6 mm · Height: 7 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521

Motorex engine oil (gear oil) manual 450 ml

Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift

GPO light switch with wiring harness base chrome version

Manufacturer: GPO · Material: Plastic · Housing material: Steel · Surface: chrome-plated · Substructure material: Steel · Color: Chrome · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Number of positions: 3 pcs · Number of cables: 5 pcs · Cable length: 970 mm · Cable bifurcation to motor: 970 mm · Cable bifurcation to lamp: 180 mm · Cable bifurcation to switch: 420 mm · Ø Handlebars: 22 mm · Width: 30 mm · Total length: 50 mm · Height: 25 mm

Saddle BTG replica cream

Material: Rubber · Material: Steel · Surface: blue galvanized · Spring-loaded: Yes · Total length: 290 mm · Lettering: No · Color: cream · Width: 250 mm · Height: 110 mm · Number of fixing points: 1 pcs

GPO exhaust clamp 60 mm chrome (version 2.0)

Nominal diameter: 60 mm · Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Width: 18 mm · Thickness: 2.5 mm · Clamping diameter: 57 - 60 mm · Ø mounting hole: 8.5 mm · Number of fixing points: 1 pcs

Outer ring 23.5/31.5/6 Main shaft left | Sachs 502, 50/2, 50/3, 50/4, 503 (A1157)

Material: Steel · Surface: hardened & ground · Width: 6 mm · Ø inside: 23.5 mm · Ø outside: 31.5 mm · Pony spare part no.: A1157 · Sachs spare part no.: 0232 049 000

Sticker "MOOR coat of arms" 44x55 head tube

Place of use: Frame (+ tank) · Rear side texture: Adhesive · Consistency: UV-resistant · Width: 44 mm · Height: 55 mm

Sticker "Moor" 21x90

Place of use: Frame (+ tank) · Rear side texture: Adhesive · Consistency: petrol resistant · Height: 21 mm · Width: 90 mm