Ball bearing with a dust lip on both sides for Puch Maxi mopeds on which a cast rim of the Leleu brand is installed.
This is a 6001 2RS quality bearing of the NTN brand.
Outer diameter: 28 mm
Inner diameter: 12 mm
Width: 8 mm
It requires 2 pieces for installation in the wheel hub.
Quality product from the Japanese manufacturer NTN.
Details
Stock number | 6001 |
Bearing cage | "-" Sheet steel cage ball-guided |
Ø inside | 12 mm |
Inner ring width | 12 mm |
Manufacturer | NTN |
Ball bearing closed | Yes |
Dust protection type | 2RS - NBR contact seal on both sides |
Bearing clearance | CM (special/noise-reduced) |
Groove ring | No |
Material | Steel, Plastic |
Surface | blank |
Bearing type | Deep groove ball bearing |
Ø outside | 28 mm |
Width | 8 mm |
Area of application | Standard |
Suitable for the following models
Puch |
Accessories & related products
Moped fans like you also bought:
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Oil type: ATF Dextron 3 (DEXIII) · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
CHF 9.90
CHF 22.00/l
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Ø outside: 11.8 mm · Total length: 185 mm · Thread length: 26 mm · Thread length: 52.5 mm · Shank length: 100 mm · Width across flats SW: 19 mm
CHF 14.90
NTN 6201 2RS ball bearing 12/32/10
Bearing type: Deep groove ball bearing · Stock number: 6201 · Ø inside: 12 mm · Ø outside: 32 mm · Width: 10 mm · Inner ring width: 10 mm · Manufacturer: NTN · Ball bearing closed: Yes · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided
CHF 9.90
swiing® ingenious wheel axle cast hub front Ø 29 mm conversion kit ball bearings | Puch
Thread type: MF12x1 (fine pitch thread) · Material: Steel · Ball bearing closed: Yes · Surface: blue galvanized · Manufacturer: swiing® ingenious parts · Width: 2.7 mm · Height: 5.9 mm · Width: 6.6 mm · Height: 9.9 mm · Width: 11 mm · Ø shaft: 11.95 mm · Ø inside: 12 mm · Width across flats SW: 19 mm · Ø outside: 29.02 mm · Width: 34.5 mm · Thread length: 40.5 mm · Thread length: 50 mm · Shank length: 74.5 mm · Total length: 165 mm
CHF 38.90