Moderate Casual 
Converter unit with 100 mm pulleys without bell housing, suitable for your Piaggio Ciao (with adaptations), Si, Bravo and Boxer with variomatic drive.
Please note the following information:
- Pulley: Ø 100 mm, for mounting on a Piaggio Ciao, the pulley must be replaced or turned down to approx. 96 mm.
- The locking plate for the nut on the back of the pulleys should be bent over .
- If you have problems starting the moped, it is worth rubbing the collar of the torque converter with a little thinner to remove the protective coating (this can settle on the starting pads).
- Check whether the torque converter is rubbing against the gearbox cover. If this is the case, replace the shim inside if necessary.
Details
| Ø outside | 100 mm |
| Manufacturer | Olympia |
| Hardness level Counter pressure spring | Standard (30 kg - steel-colored) |
| Gearbox type | Vario |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
Hot 
swiing® ingenious pulleys Ø 96 mm | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® ingenious parts · Material: Steel · Material: special bearing bronze · Ø Outer pulley: 96 mm · Surface: gas nitrided · Gearbox type: Vario · Alternative version of Piaggio spare part no.: 103382 · Alternative version of Piaggio spare part no.: 103823 · Alternative version of Piaggio spare part no.: 220923 · Alternative version of Piaggio spare part no.: 220924
CHF 119.90
GPO converter with swiing® pulleys Ø 96 mm | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 96 mm · Manufacturer: GPO · Manufacturer: swiing® ingenious parts · Hardness level Counter pressure spring: Standard (30 kg - steel-colored) · Gearbox type: Vario · Alternative version of Piaggio spare part no.: 104649 · Alternative version of Piaggio spare part no.: 221171
CHF 179.90
Not in stock
GPO converter with swiing® pulleys Ø 96 mm without bell housing | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 96 mm · Manufacturer: GPO · Hardness level Counter pressure spring: Standard (30 kg - steel-colored) · Gearbox type: Vario · Alternative version of Piaggio spare part no.: 104649 · Alternative version of Piaggio spare part no.: 221171
CHF 149.90
Not in stock
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut
CHF 9.90
Dell'Orto 16/16 SHA carburetor hand choke
Total length: 82 mm · Manufacturer: Dell'Orto · Width: 72 mm · Height: 111 mm · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Color: black · Nominal diameter: 16 mm · Carburetor type: SHA (type 4) · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 16 mm · Ø Output inside: 16 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Ø Internal connection: 19 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Choke control: Hand choke · Nozzle thread: M5 · Nozzle size: 82
CHF 69.90
Airsal gasket set 44 - 45 mm
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Area of application: Tuning · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing outlet: 42 mm
CHF 8.90
NTN 6203 NR C3 ball bearing with outer ring (old model) | Puch E50
Bearing type: Deep groove ball bearing · Stock number: 6203 · Ø inside: 17 mm · Inner ring width: 12 mm · Ø outside: 40 mm · Ø outside: 44 mm · Manufacturer: NTN · Ball bearing closed: No · Width: 12 mm · Bearing clearance: C3 · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: Yes · Area of application: Standard · Material: Steel · Surface: blank
CHF 10.90
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom | Puch Maxi S, N
Possible lever positions: open / closed / reserve · Material lever: Aluminum · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut · Puch spare part no.: 349.3.22.030.0 · Puch spare part no.: 349.4.22.030.0
CHF 9.90
Collection only possible with online purchase and appointment.
