"RACING" sticker with black lettering, for the top of the tank of Puch X30 NG-2AH mopeds.
Also suitable for Puch X30 NS/NL mopeds.
Dimension: 105 x 67 mm
This is a high-quality sticker that is petrol and UV-resistant.
We recommend preparing the area to be covered with a degreasing cleaning cloth to give the stickers a firm hold.
You can find this in the accessories section.
Details
| Width | 105 mm |
| Place of use | Tank (+ frame) |
| Height | 67 mm |
| Rear side texture | Adhesive |
| Consistency | UV-resistant, petrol resistant |
Suitable for the following models
| Puch |
Moped fans like you also bought:
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Thickness: 4.5 mm · Number of teeth: 45 pcs · Ø inside: 94 mm · Cranking (offset): 8 mm · Hole spacing 2: 68 mm · Ø bolt circle: 105.5 mm · Hole spacing: 36.5 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6.7 mm
CHF 19.90
EBR fork reinforced black | Puch
Color: Chrome · Color: black · Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Adjustable: No · Ø spars: 28 mm · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Head tube length: 180 mm · Thread type: MF26x1 (fine pitch thread) · Fork bridge - center wheel axle: 381 mm · Total length: 580 mm · Distance brake cam to wheel axle center-center: 40 mm · Thread length: 57 mm
CHF 132.00
Spotlight round Ø 13 cm chrome / black
Material: Sheet metal (steel) · Test mark: none · Color: Chrome · Color: black · Surface: chrome-plated · Color: transparent · Surface: varnished · Housing material: Metal · Lens material: Plastic · Width: 134 mm · Speedometer recording: None · Bulb holder: BA15d · Height: 147 mm · Ø outside: 130 mm · Switch included: No · Battery operated: No · Depth: 80 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Thread size: M6 · Area of application: Standard
CHF 24.90
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Color: black · Nominal diameter: 19 mm · Carburetor type: PHBG CS · Width: 70 mm · Total length: 82 mm · Ø Internal connection: 24 mm · Height: 124 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5 · Mounting type: Plug connection clamped · Nozzle size: 75 · Area of application: Racing · Area of application: Tuning · Size of secondary nozzle: 45
CHF 119.90
Collection only possible with online purchase and appointment.
