Special saddle in a low design and deep sissy bar for your moped, moped and small motorcycle.
Chopper seat with Puch print. The moped seat is not sprung. The saddle holder is in the front part, so the seat slides far back.
The raised upholstery and the attached backrest ensure a very comfortable seat.
Width: 25 cm
Length: 30 cm
Height (upholstery): approx. 6 cm
Total height of upholstery: 18 cm
Total height with backrest: 28 cm
Figure 5 serves only to illustrate the assembled saddle.
Alternative saddles and other attachments can be found in the accessories section.
A quality product made in Portugal.
Details
Manufacturer | Made in Portugal |
Color | black |
Total length | 300 mm |
Lettering | Yes |
Width | 250 mm |
Height | 280 mm |
Suitable for the following models
Puch |
Accessories & related products
Denfeld saddle black NOS
Manufacturer: Denfeld · Material: Plastic · Material: Steel · Ø Saddle tube holder: 22 mm · Surface: galvanized (blue) · Width: 280 mm · Spring-loaded: Yes · Total length: 280 mm · Lettering: No · Height: 20 mm · Height: 120 mm · Number of fixing points: 1 pcs · Material thickness: 2 mm · Material thickness: 4 mm · Color: black
CHF 299.90
Saddle suspension low version black
Manufacturer: Made in Portugal · Material: Imitation leather · Material: Steel · Ø Saddle tube holder: 22 mm · Surface: powder-coated · Width: 90 mm · Width: 245 mm · Total length: 300 mm · Spring-loaded: Yes · Lettering: No · Height: 165 mm · Color: black · Number of fixing points: 1 pcs
CHF 49.90
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm
CHF 9.90
BING 15 mm Bing original carburetor (1/15/46A)
Manufacturer: BING · Material: Aluminum · Component group Carburetor: Carburetor complete · Nominal diameter: 15 mm · Mounting type: Plug connection clamped · Carburetor type: SRE · Choke control: Hand choke · Nozzle size: 82 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Total length: 66 mm · Ø Output inside: 15 mm · Height: 95 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Area of application: Standard · Area of application: Tuning · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Clamping screw torque (max.): 4 N/m
CHF 132.90
GPO piston stopper M14x1.25
Manufacturer: GPO · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Diameter: 12 mm · Diameter: 16 mm · Total length: 83 mm · Thread type: MF14x1.25 (fine pitch thread) · Width across flats SW: 17 mm
CHF 9.50
OMG fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: OMG · Possible lever positions: open / closed / reserve · Material lever: Plastic · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 100 mm
CHF 11.70