Classic vintage saddle made of black plastic in vintage style for your bike, moped, moped and small motorcycle.
The seat surface is very comfortable due to the tension springs under the seat cover and thus adapts perfectly to your rear end.
The base is painted silver and the springs are galvanized. The barrel spring under the base absorbs the biggest impacts and transforms them into a pleasant rocking motion.
The cover must be riveted to the frame at the front and rear ends of the saddle cover. The necessary fastening holes in the saddle cover are not yet present and must be positioned by you; we recommend starting at the back outside and then marking the front holes, at the end the metal plates can be bent around the frame.
The corresponding rivets are included.
Super saddle for classic car conversions and restoration of your vintage gem.
Saddle tube mount: 22 mm
Length: 235 mm
Width: 247 mm
Total height: 140 mm
Height center of saddle mounting bolt - seat surface: 100 mm
You can find suitable aids and alternative saddles (if this is too complex for you) as well as matching saddle rails in the accessories section.
Details
Total length | 235 mm |
Ø Saddle tube holder | 22 mm |
Material | Plastic |
Color | black |
Width | 247 mm |
Spring-loaded | Yes |
Lettering | No |
Height | 140 mm |
Accessories & related products
Saddle Comfort Raute barrel springs black
Manufacturer: Made in Italy · Material: Imitation leather · Material: Steel · Ø Saddle tube holder: 22 mm · Color: black · Surface: blue galvanized · Width: 220 mm · Spring-loaded: Yes · Total length: 240 mm · Lettering: No · Height: 70 mm · Height: 110 mm · Number of fixing points: 1 pcs
CHF 48.30
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
CHF 9.90
CHF 22.00/l
Motorex Automatic Motor Oil (ATF) 450 ml
Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Oil type: ATF Dextron 3 (DEXIII) · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Area of application: Gearbox lubrication with clutch · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
CHF 9.90
CHF 22.00/l
Leonelli 12V voltage regulator (1A quality)
Total length: 50 mm · Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Width: 27 mm · Type of current: Alternating current (AC) · Height: 15 mm · Tension: 12 V · Ø mounting hole: 6 mm · Performance: 100 W · Mounting type: Screws
CHF 34.90
BERU breaker with cable | Bosch / Ducati
Manufacturer: BERU · Material: Steel · Cable available: Yes · Cable length: 100 mm · Ø mounting hole: 4.5 mm · Ø axle: 4 mm · Ø Internal flywheel: 90 mm · Number of fixing points: 1 pcs · Area of application: Original · Area of application: Standard · Alternative version of the Pony Spare part no.: A4606 · BOSCH spare part no.: 1 217 013 025 · Alternative version of Sachs spare part no.: 0983 106 000 · BERU spare part no.: 0 340 100 710
CHF 14.90
Meteor piston 38 mm | Sachs 50/2, 503 (A2772)
Manufacturer: Meteor · Nominal diameter: 38 mm · Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Thick piston ring: 1.6 mm · Weight: 79 g · Pony spare part no.: A2772 · Pony spare part no.: A4358 · Sachs spare part no.: 0286 377 010 · Sachs spare part no.: 0286 378 005
CHF 49.90
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing cage: Brass cage ball-guided · Ø inside: 15 mm · Stock number: E15 · Ø outside: 35 mm · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Bearing type: Shoulder bearing · Width: 8 mm · Ball bearing closed: No · Area of application: Standard · Pony spare part no.: A1149 · Sachs spare part no.: 0232 017 006
CHF 24.90