Steel drilling jig, suitable for the repair tab of the fan cover on your Puch X30 Velux moped / moped with ZA50 engine.
Installation procedure:
- Place the drilling jig in position, fix with a pair of pliers or a small screw clamp
- Drill the position with a 3 mm drill bit, remove the template
- Drill out to 4 mm
- Deburr the hole on both sides with a countersink
- Screw on the bracket (item 33323 in the accessories) and use threadlocker as required
- Refit the fan cover as usual
You can find suitable fastening material and other practical repair solutions from Sigg's workshop in the accessories section.
A kick-ass custom product straight from the Siggnature workshop.
Details
| Manufacturer | Siggnature |
| Material | Steel |
| Total length | 44 mm |
| Width | 18.6 mm |
| Height | 2 mm |
| Hole pattern [mm] | 11.2 |
Suitable for the following models
| Puch | Z50 (X30 Velux) |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Area of application: Chemistry · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
Collection only possible with online purchase and appointment.
