Racing exhaust from SITO in the original look suitable for your Piaggio Si moped / moped.
This racing silencer is suitable for 38 - 46 mm cylinder kits.
Absolutely top product.
Very good workmanship, high accuracy of fit, very good performance values. This exhaust beats even the Simonini snail muffler on 75 cc setups in the lower rev range.
Technical data:
Ø connection: 22 mm
Ø outer flame tube: 24 mm
In response to frequent questions, we have tried to summarize the advantages and disadvantages compared to the Giannelli New Power below:
Advantages of SitoPlus compared to Giannelli New Power:
- higher torque
- accuracy of fit
- processing
- significantly quieter and therefore less noisy
- stamped DGM number (note, however, no approval in Switzerland)
Disadvantages compared to Giannelli New Power:
- Slightly less top-end sipping
- Hands a little less on the gas
You can find more exhausts and tuning parts for your Piaggio in the accessories section.
Quality product from the Italian manufacturer SITO.
Details
| Manufacturer | SITO |
| Material | Steel |
| Surface | varnished |
| Color | black |
| Ø Silencer | 70 mm |
| Total length | 720 mm |
| Ø Internal connection | 22.3 mm |
| Ø Flame tube outside | 25 mm |
| Exhaust type | Cylindrical |
| Mounting type | Welded lug |
| Ø outside | 14 mm |
| Flame tube attachment | Plug connection clamped |
| Number of fixing points | 1 pcs |
Suitable for the following models
| Piaggio | Si |
Accessories & related products
swiing nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing · Quantity: 10 pcs · Material: Brass · Carburetor type: PHBG · Carburetor type: SHA (type 3) · Carburetor type: SHA (type 4) · Nozzle type: Main nozzle · Total length: 8 mm · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
CHF 20.90
Polini 43 mm cylinder kit incl. head 10 mm KoBo | Piaggio SI, Bravo, Grillo
Nominal diameter: 43 mm · Manufacturer: Polini · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 10 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
CHF 214.90
Malossi tuning set 43 mm | Piaggio SI, Bravo, Grillo
Nominal diameter: 44 mm · Manufacturer: Dell'Orto · Manufacturer: Malossi · Manufacturer: NGK · Manufacturer: SITO · Manufacturer: swiing · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
CHF 376.80
Dell'Orto 13/13 SHA carburetor & racing air filter set | Piaggio SI, Boss, Grillo
Manufacturer: Dell'Orto · Manufacturer: Malossi · Nominal diameter: 13 mm · Carburetor type: SHA (type 3) · Ø Internal connection: 16 mm · Height: 118 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 66 · Mounting type: Plug connection clamped · Total length: 55 mm · Width: 60 mm · Area of application: Tuning
CHF 75.90
swiing® revival screw set exhaust fastening Inox | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 13 mm · Thread length: 16 mm · Shank: No · Number of components: 3 pcs
CHF 2.80
Moped fans like you also bought:
swiing nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing · Quantity: 10 pcs · Material: Brass · Carburetor type: PHBG · Carburetor type: SHA (type 3) · Carburetor type: SHA (type 4) · Nozzle type: Main nozzle · Total length: 8 mm · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
CHF 20.90
Malossi air filter | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 53.2 mm · Height: 88.7 mm · Manufacturer: Malossi · Camouflaged: No · Material: Plastic · Area of application: Tuning · Color: black · Filter type: Foam · Total length: 31.2 mm · Ø Internal connection: 51 mm · Width: 95 mm · Mounting type: Plug connection clamped
CHF 19.90
Malossi 43 mm cylinder kit 10 mm KoBo new version | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 43 mm · Manufacturer: Malossi · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.3 mm · Ø piston pin (B): 10 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
CHF 144.90
Malossi 43 mm cylinder kit 12 mm KoBo new version | Piaggio Ciao, SI, Boxer, Bravo
Nominal diameter: 43 mm · Manufacturer: Malossi · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.4 mm · Ø outlet inside: 18.3 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
CHF 144.90
Polini air filter | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 53 mm · Width: 98 mm · Manufacturer: Polini · Material: Plastic · Color: black · Filter type: Foam · Total length: 29 mm · Ø Internal connection: 50.6 mm · Mounting type: Plug connection clamped · Height: 94.7 mm · Area of application: Tuning · Camouflaged: No
CHF 14.90
Malossi cylinder head for 41 - 43 mm cylinder kit | Piaggio SI, Bravo
Manufacturer: Malossi · Material: Aluminum · Ø cylinder: 41 - 43 mm · Camouflaged: No · Number of fixing points: 3 pcs · Hole pattern [mm]: 35 x 55 · Candle thread: short · Decompressor: Yes · Total length: 134 mm · Width: 94 mm · Height: 52 mm · Area of application: Racing
CHF 69.90
Dell'Orto 13/13 SHA carburetor | Piaggio SI, Boss, Grillo
Manufacturer: Dell'Orto · Material: Aluminum · Color: black · Carburetor type: SHA (type 3) · Total length: 55 mm · Nominal diameter: 13 mm · Width: 60 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Height: 118 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 66 · Ø Inside entrance: 13 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Mounting type: Plug connection clamped · Ø Internal connection: 16 mm · Area of application: Tuning · Choke control: Hand choke · Camouflaged: No
CHF 69.90
Malossi tuning set 43 mm | Piaggio SI, Bravo, Grillo
Nominal diameter: 44 mm · Manufacturer: Dell'Orto · Manufacturer: Malossi · Manufacturer: NGK · Manufacturer: SITO · Manufacturer: swiing · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
CHF 376.80
Collection only possible with online purchase and appointment.
