High-quality Ø 90x17 mm brake pads with return cable spring for all standard Rücktritträdern, on Puch X30 Sport, Puch X30 Velux, Sachs 503, Zündapp Belmondo, Sachs 50/2 etc.. Mopeds.
The pad is slotted at an angle. This ensures better heat and brake dust dissipation, resulting in an increased braking effect.
Due to the uncompromising braking force, these brake pads are mainly used in racing applications.
The set includes the following fixed parts:
Details
| Manufacturer | swiing |
| Area of application | Racing |
| Width | 17 mm |
| Springs included | Yes |
| Slotted | Yes |
| Number of springs | 1 pcs |
| Ø drum | 90 mm |
Suitable for the following models
| Puch | |
| Sachs | |
| Zündapp Belmondo | |
| Cilo |
Accessories & related products
Eurol copper grease 100 g
Temperature resistance (min.): -40 - 1100 °C · Manufacturer: Eurol · Contents [g]: 100 g · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Hazard warning: Very toxic to aquatic organisms · Signal word: Danger · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Area of application: Fat
CHF 11.90
CHF 119.00/kg
Motorex Brake Cleaner 750 ml
Manufacturer: Motorex · Contents [ml]: 750 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS04 - Gas under pressure · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Area of application: Cleaner
CHF 24.90
CHF 33.20/l
Autosol Brake Cleaner 500 ml
Manufacturer: Autosol · Contents [ml]: 500 ml · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Area of application: Cleaner
CHF 13.90
CHF 27.80/l
swiing® ingenious assembly tool clasp brake shoe
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Total length: 41.1 - 65 mm · Ø outside: 10 mm · Width across flats SW: 8 mm · Thread type: M6x1 (standard thread) · Thread length: 30 mm · Number of components: 3 pcs · Area of application: Special tool
CHF 16.40
Moped fans like you also bought:
KMC drive chain 415H (reinforced) 128L
Color: gray · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Number of chain links: 128 pcs · Chain type: 415H · Rolling circumference: 1626 mm · Chain pitch: 1/2" x 3/16" · Chain lock type: Spring lock · Ø bore: 4 mm
CHF 11.90
CHF 12.50
GPO license plate holder Inox
Color: silver · Total length: 145 mm · Manufacturer: GPO · Material: Chrome steel (stainless steel) · Width: 105 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Height: 5.3 mm · Ø mounting hole: 5 mm · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
CHF 9.90
CHF 10.90
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing cage: "-" Sheet steel cage ball-guided · Ø inside: 25 mm · Stock number: K042 · Ø outside: 36 mm · Inner ring width: 25 mm · Manufacturer: swiing® revival parts · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Bearing type: Ball ring · Width: 6.8 mm · Ball bearing closed: No · Area of application: Standard
CHF 7.90
swiing® revival ball bearing 14/27/6.3 coaster brake driver
Bearing cage: "-" Sheet steel cage ball-guided · Ø inside: 14 mm · Stock number: K1052 · Ø outside: 27 mm · Inner ring width: 7 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Surface: blank · Bearing type: Ball ring · Ball bearing closed: No
CHF 6.90
swiing® ingenious assembly tool clasp brake shoe
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Total length: 41.1 - 65 mm · Ø outside: 10 mm · Width across flats SW: 8 mm · Thread type: M6x1 (standard thread) · Thread length: 30 mm · Number of components: 3 pcs · Area of application: Special tool
CHF 16.40
Collection only possible with online purchase and appointment.
