Intake air restrictor with Ø 10.5 mm inner diameter suitable for all 15 mm swiing and Bing original and reproduction Bing carburettors.
An O-ring is pre-assembled, which can be used for swiing and reproduction Bing carburetors. If an original Bing carburetor is available, the corresponding O-ring must also be ordered from the accessories and replaced with the pre-assembled one.
The fuel/air mixture is adjusted to suit the requirements.
For those who regulate the mixture via the intake air, however, these practical nozzles are like Christmas and Easter at the same time.
The tedious task of "taping off" the air filter is now a thing of the past.
The eyes of the thrifty among us will also light up, as fuel consumption is also minimized and more money is left over at the end of the month.
The throttle body is simply inserted into the carburettor on the intake side. Thanks to the attached sealing ring, the throttle body is bombproof.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Surface | anodized |
| Carburetor type | SRF |
| Color | black |
| Ø Passage | 10.5 mm |
| Ø outside | 15 mm |
Accessories & related products
GPO 15 mm carburetor tuning | Puch
Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Carburetor type: SRE · Width: 50 mm · Camouflaged: No · Nominal diameter: 15 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Total length: 66 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
CHF 64.90
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Total length: 66 mm · Width: 50 mm · Height: 95 mm · Manufacturer: swiing · Material: Aluminum · Area of application: Tuning · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
CHF 79.90
swiing 15 mm carburetor tuning camouflaged | Sachs 503
Nominal diameter: 15 mm · Width: 50 mm · Height: 95 mm · Manufacturer: swiing · Material: Aluminum · Carburetor type: SRE · Ø fuel hose connection: 6 mm · Ø Internal connection: 20 mm · Area of application: Tuning · Ø Inside entrance: 15 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Total length: 66 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
CHF 79.90
Moped fans like you also bought:
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Manufacturer: GPO · Area of application: Tuning · Color: Chrome · Material: Metal · Material: Rubber · Color: black · Filter type: Grille · Total length: 113 mm · Camouflaged: No · Ø outside: 61 mm · Length rubber part: 63.5 mm · Length of filter section: 49 mm · Ø Internal connection: 20 mm · Mounting type: Bride · Mounting type: Plug connection clamped
CHF 13.00
Light coil 6V with cable
Area of application: Original · Area of application: Standard · Tension: 6 V · Ø Internal flywheel: 90 mm · Performance: 17 W · Mounting type: Screws · Ø mounting hole: 4.1 mm · Hole spacing: 54 mm · Total length: 76.8 mm · Height: 25.2 mm · Number of fixing points: 2 pcs
CHF 18.90
Oil filler plug with sealing ring | Puch Maxi
Material: Steel · Surface: blue galvanized · Total length: 14.6 mm · Drive: Slot · Thread length: 6 mm · Screw head: Lens head · Ø External head: 14 mm · Number of components: 2 pcs · Thread type: M10x1.5 (standard thread) · Puch spare part no.: 364.1.10.660.1
CHF 3.50
Not in stock
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Manufacturer: swiing® revival parts · Width across flats Screw: 13 mm · Material: Copper · Material: Steel · Surface: blue galvanized · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Drive: Slot · Color: silver · Screw head: Hexagon · Thread length: 12 mm · Total length: 18 mm · Puch spare part no.: 901.1053
CHF 3.50
M10 sealing ring Fiber
Ø inside: 10 mm · Material: Fiber · Area of application: Standard · Surface: raw · Place of use: Carburetor · Place of use: Motor housing · Ø outside: 13.8 mm · Thickness: 1.6 mm · Pony spare part no.: A1817 · Pony spare part no.: A5650 · Puch spare part no.: 27071 · Sachs spare part no.: 0250 042 001 · Sachs spare part no.: 0650 131 000
CHF 1.60
Collection only possible with online purchase and appointment.
