Special stud bolt for Sachs 502, 50/2, 50/3, 50/4, 503, 504 mopeds, mopeds and small motorcycles.
The cylinder is optimally guided and centered thanks to the shaft in the middle.
Due to the small key width, the nut can also be easily fitted in hard-to-reach places on the cylinder base.
The increased tensile strength compensates for the difference in thread diameter.
Length: 27 mm
Ø shank: 6.1 mm
Thread: M6 / M5
Thread length: 14 / 10 mm
Strength of stud bolt: 12.9
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | burnished |
| Total length | 27 mm |
| Diameter | 6 mm |
| Strength class | 12.9 |
| Thread type | M6x1 (standard thread), M5x0.8 (standard thread) |
| Thread length | 13 mm, 10 mm |
Suitable for the following models
| Universal | |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Area of application: Chemistry · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
swiing® revival stud bolts M6x38 inlet/outlet galvanized (10.9 strength)
Manufacturer: swiing® revival parts · Material: Steel · Thread type: M6x1 (standard thread) · Surface: galvanized (blue) · Diameter: 5.9 mm · Total length: 38 mm · Thread length: 11 mm · Thread length: 19 mm · Strength class: 10.9
CHF 2.00
swiing® revival cylinder base gasket cylinder 0.3 mm | Sachs 503
Place of use: Cylinder base · Manufacturer: swiing® revival parts · Material: Oiled paper · Ø inside: 45 mm · Nominal diameter: 45 mm · Ø cylinder: 38 - 40 mm · Thickness: 0.3 mm · Hole pattern [mm]: 60 x 40 · Area of application: Standard
CHF 3.40
Not in stock
swiing stud bolt set M6 / M5 Sachs (12.9 strength) Special
Drive: External hexagon · Manufacturer: swiing · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Total length: 27.3 mm · Diameter: 6 mm · Strength class: 10 · Strength class: 12.9 · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread length: 9.5 mm · Thread length: 14 mm · Width across flats SW: 8 mm
CHF 19.20
Flange nut M5 galvanized (10 strength)
Material: Steel · Surface: galvanized (blue) · Nut type: Flange nut · Thread type: M5x0.8 (standard thread) · Drive: External hexagon · Height: 5 mm · Width across flats SW: 8 mm · Strength class: 10 · Pony OEM number: A1501 · Sachs OEM number: 0242 024 104
CHF 0.80
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
CHF 9.90
CHF 22.00/l
swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Ø shaft: 5.85 mm · Material: Steel · Surface: galvanized (blue) · Color: silver · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Thread type: M6x1 (standard thread) · Shank: Yes · Shank length: 8 mm · Total length: 34 mm · Strength class: 10.9 · Thread length: 22 mm · Number of components: 12 pcs · Area of application: Standard
CHF 4.90
swiing® revival gasket set 38 mm cylinder | Sachs 503
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm · Number of components: 3 pcs · Decompressor: No · Hole spacing inlet: 32 mm · Area of application: Standard · Area of application: Tuning
CHF 10.90
Meteor piston rings 38 x 2 mm (FS) (pair) | Sachs 50/2, 503
Manufacturer: Meteor · Thick piston ring: 1.6 mm · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Height: 2 mm · Pony OEM number: A1091 · Sachs OEM number: 0215 009 000
CHF 10.90
Screw M6x20 cylinder head Allen key galvanized
Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Drive: Hexagon socket · Screw head: Cylinder head · Total length: 25.9 mm · Ø External head: 9.9 mm · Thread length: 20 mm · Shank: No · Width across flats SW: 5 mm · Strength class: 8.8
CHF 1.70
Collection only possible with online purchase and appointment.
