Chain guard for your Zündapp Belmondo moped / moped.
The steel cover plate has been faithfully reproduced and painted. Thanks to the weld nuts, the plate is ready to install and can be mounted directly to the blower cover with two screws.
Hole spacing: 66 mm
Thread: M4
Thickness: 0.5 mm
Material: steel
Surface: painted
The chain guard plate provides a perfect finish and is a must-have for every original Belmondo restoration.
You can find more add-on parts for your Zündapp in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | varnished |
| Color | silver |
| Number of fixing points | 2 pcs |
| Thread type | M4x0.7 (standard thread) |
| Total length | 99 mm |
| Height | 137 mm |
Suitable for the following models
| Zündapp Belmondo |
Accessories & related products
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Number of chain links: 114 pcs · Chain type: 415H · Rolling circumference: 1448 mm · Color: gray · Chain pitch: 1/2" x 3/16" · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
CHF 18.90
swiing® revival 17" rear fender Inox | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Wheel size [inch]: 17 " · Color: Chrome · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: partly round · Total length over ends: 595 mm · Scope: 950 mm · Wide mudguard profile: 70 mm · Mounting type: Nuts & bolts · Height of mudguard profile: 25 mm · Total height from support surface to top edge: 305 mm
CHF 79.90
swiing® revival 17" front fender Inox | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Wheel size [inch]: 17 " · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: partly round · Total length over ends: 525 mm · Scope: 638 mm · Wide mudguard profile: 69 mm · Mounting type: Nuts & bolts · Height of mudguard profile: 25 mm · Total height from support surface to top edge: 157 mm
CHF 59.90
swiing® revival rear mudguard strut chrome (Version 2.0) | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Number of fixing points: 3 pcs · Distance mudguard - center hole: 318 mm · Ø mounting hole: 6.5 mm · Total length: 345 mm · Mounting type: Nuts & bolts
CHF 35.90
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder
CHF 2.80
swiing nozzle set M4 (76 - 86) Bing 18, Bing 85
Drive: Slot · Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: 17 Catalyst · Carburetor type: 18 Catalyst · Carburetor type: 85 · Nozzle type: Main nozzle · Nozzle thread: M4x0.7 (standard thread) · Nozzle size: 54 · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 86
CHF 15.90
Transval speedometer drive 17" with grease nipple
Total height: 52 mm · Manufacturer: Transval · Thread type: MF10x1 (fine pitch thread) · Material: Aluminum · Color: gray · Wheel size [inch]: 17 " · Ø outside: 41 mm · 4-edge speedometer cable: 1.9 mm · Overall width outside: 60 mm · Ø mounting hole: 11 mm · Place of use: left · Place of use: right · Ø axle: 11 mm
CHF 29.90
Collection only possible with online purchase and appointment.
