Securing plates made of stainless steel for securing sprockets with 5-hole mount and 72° pitch on your moped / moped with Grimeca hub.
The pre-stressed plates are used to secure the bolts on the sprocket. During assembly, two plates must be placed on top of each other. The locking tab on the lower plate must be cut off or knocked straight.
Number of plates: 3 pcs.
Thickness: 1 mm
Pitch: 72°
Pitch circle: 115 mm
Number of fixing points: 5 pcs.
Material: Chrome steel (stainless steel)
Matching sprockets and screw sets can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
Details
Manufacturer | swiing® revival parts |
Material | Chrome steel (stainless steel) |
Number of lobes | 6 pcs |
Thickness | 1 mm |
Ø bolt circle | 115 mm |
Suitable for the following models
Universal | |
Puch | |
Sachs |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Area of application: Chemistry · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
ESJOT sprocket 51 teeth Grimeca (5-hole) galvanized
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of fixing points: 5 pcs · Ø inside: 98 mm · Ø mounting hole: 6.5 mm · Manufacturer: ESJOT · Material: Steel · Surface: blue galvanized · Color: silver · Number of teeth: 51 pcs · Cranking (offset): 8 mm
CHF 39.90
ESJOT sprocket 45 teeth galvanized Grimeca (5-hole)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of fixing points: 5 pcs · Ø inside: 98 mm · Ø mounting hole: 6.5 mm · Manufacturer: ESJOT · Material: Steel · Surface: blue galvanized · Color: silver · Number of teeth: 45 pcs · Ø bolt circle: 115 mm · Cranking (offset): 8 mm
CHF 39.90
ESJOT sprocket 41 teeth Grimeca (5-hole)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of fixing points: 5 pcs · Ø inside: 98 mm · Ø mounting hole: 6.5 mm · Manufacturer: ESJOT · Material: Steel · Surface: blue galvanized · Color: silver · Number of teeth: 41 pcs · Ø bolt circle: 115 mm · Cranking (offset): 8 mm
CHF 39.90
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Drive: External hexagon · Drive: Slot · Width across flats SW: 7 mm · Total length: 15 mm · Ø outside: 8 mm · Manufacturer: Magura · Material: Brass · Area of application: Standard · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Screw head: Hexagon · Thread length: 7 mm
CHF 2.50
GPO fork lock | Puch
Ø rotating part: 12 mm · Ø Pin: 8 mm · Ø outside: 12 mm · Manufacturer: GPO · Wide locking block: 4.1 mm · Width: 17 mm · Length of turned part: 25.6 mm · Locking block length: 15.3 mm · Material: Brass · Material: Spring steel · Material: Steel · Surface: blank · Total length: 40.8 mm
CHF 9.90
swiing® revival snap ring low control bearing set (version 2.0)
Manufacturer: swiing® revival parts · Height: 7 mm · Material: Spring steel · Surface: blank · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Thickness: 0.6 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
CHF 2.50
Magura set screw M6x34 mm lock nut SW8
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Ø cable holder: 3.05 mm · Ø Receptacle: 7.05 mm · Thread type: M6x1 (standard thread) · Slotted: No · Total length: 34 mm · Width across flats Screw: 8 mm · Width across flats nut: 8 mm · Thread length: 24 mm
CHF 2.50
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Total length: 6 mm · Ø outside: 5 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread length: 4 mm
CHF 2.00
Magura set screw M5x34 mm
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Ø cable holder: 2.55 mm · Ø Receptacle: 7.05 mm · Thread type: M5x0.8 (standard thread) · Slotted: No · Total length: 34 mm · Width across flats Screw: 8 mm · Width across flats nut: 8 mm · Thread length: 24 mm
CHF 2.50
Handlebar stem 35 cm curved with chrome strut
Clamping diameter: 25 mm · Ø outside: 22 mm · Manufacturer: Made in Germany · Width: 710 mm · Height: 350 mm · Material: Steel · Surface: chrome-plated · Color: Chrome · Length handlebar ends: 140 mm · Crossbar: Yes · Mounting type: Front boom mounting
CHF 33.40
CHF 38.70