Special adjusting screw holder made of aluminum to be able to mount adjusting screws on the old Magura grips on your moped, moped and small motorcycle.
The holder is pushed into the Magura grip with the chamfered side.
Attention: Only applicable to the old Magura grips, where the throttle cable is mounted directly with a cable clamp in the grip tube (not suitable for the new grips with sliding block).
Internal thread: M6x1 mm (standard set screws)
Material: aluminium
Surface: colourless anodized
Figures 4 & 5 show the mount in assembled condition.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Surface | anodized |
| Thread type | M6x1 (standard thread) |
| Color | silver, transparent |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | |
| Zündapp Belmondo |
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Ø Cable bushing: 2.3 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Screw head: Hexagon · Thread length: 7 mm · Ø Bundle: 6 mm · Total length: 15 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Drive: Slot · Width across flats SW: 7 mm · Area of application: Standard
CHF 2.50
Magura set screw M6x34 mm lock nut SW8
Slotted: No · Width across flats Screw: 8 mm · Manufacturer: Magura · Width across flats nut: 8 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø cable holder: 3.05 mm · Ø Receptacle: 7.05 mm · Total length: 34 mm · Thread type: M6x1 (standard thread) · Thread length: 24 mm
CHF 2.50
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Area of application: Chemistry · Material: Silicone · Color: gray · Contents [ml]: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 315 °C
CHF 19.90
CHF 284.29/l
Magura set screw M6x34 mm lock nut SW10
Thread type: M6x1 (standard thread) · Thread length: 23 mm · Total length: 34 mm · Slotted: No · Ø Receptacle: 7.05 mm · Manufacturer: Magura · Ø cable holder: 3.05 mm · Width across flats nut: 10 mm · Width across flats Screw: 8 mm · Material: Brass · Surface: nickel-plated
CHF 2.50
Crankshaft | Zündapp (Type 434 / 247)
Material: Steel · Cheek type: standard · Crankshaft stroke: 42 mm · Ø coupling pin / vario pin: 15 mm · Connecting rod length center-center: 91.5 mm · Total length of crankpin on clutch side: 40.4 mm · Total length crankpin ignition side: 65 mm · Ø crank webs: 85 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 16 mm · Ø Bearing seat (clutch side): 15 mm · Ø Bearing seat (ignition side): 15 mm · Thread type: MF10x1 (fine pitch thread) · Thread length: 8.5 mm · Thread length: 14 mm · Dimension needle bearing: 12 /15 x 14.2 mm (axe 12) · Wide crank webs: 30 mm · Ø 1st step (on the coupling side): 21 mm · Ø 2nd shoulder (on the clutch side): 9.6 mm · Length of shoulder (ignition side): 35 mm · Weight: 892 g
CHF 159.90
Collection only possible with online purchase and appointment.
