Sliding bush for the clutch bell or clutch drum suitable for your Puch moped / moped with E50 engine.
The bearing bush is made from a special bearing bronze. Thanks to this special material, the sliding bushing has a long service life and very good emergency running properties
Details
| Nominal diameter | 15 mm |
| Manufacturer | swiing® revival parts |
| Material | special bearing bronze |
| Ø inside | 15 mm |
| Ø outside | 17 mm |
| Total height | 21.75 mm |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning · Material: Steel · Material addition: Steel · Surface: blue galvanized · Number of springs: 3 pcs · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø outside: 92.5 mm · Thickness: 19 mm
CHF 189.90
Not in stock
swiing® revival thrust washer set Ø 15 / 17 mm | Puch E50
Manufacturer: swiing® revival parts · Ø inside: 15 mm · Ø inside: 17 mm · Material: Steel · Surface: hardened & ground · Ø outside: 22 mm · Ø outside: 24 mm · Area of application: Standard · Thickness: 1.1 mm · Thickness: 1.3 mm · Thickness: 1.5 mm · Thickness: 1.7 mm
CHF 38.70
Plain bearing 15/17/21.75 Clutch basket "Racing" | Puch E50
Ø inside: 15 mm · Manufacturer: Made in Switzerland · Area of application: Racing · Area of application: Tuning · Material: special bearing bronze · Nominal diameter: 15 mm · Ø outside: 17 mm · Total height: 21.75 mm · Puch spare part no.: 349.1.12.011.1 · Puch spare part no.: 349.2.12.011.1
CHF 24.90
Moped fans like you also bought:
Clutch 3-jaw (aluminum) | Puch E50
Material: Aluminum · Area of application: Original · Area of application: Standard · Material: Steel · Material addition: Composite materials · Number of springs: 3 pcs · Ø outside: 93 mm · Ø inside: 12 mm · Ø inside: 14.6 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Thickness: 20.9 mm
CHF 49.90
GPO gasket set | Puch E50
Manufacturer: GPO · Number of components: 7 pcs · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 19.9 mm · Area of application: Standard · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
CHF 9.90
Oil filler plug with sealing ring | Puch Maxi
Material: Steel · Surface: blue galvanized · Total length: 14.6 mm · Drive: Slot · Thread length: 6 mm · Screw head: Lens head · Ø External head: 14 mm · Number of components: 2 pcs · Thread type: M10x1.5 (standard thread) · Puch spare part no.: 364.1.10.660.1
CHF 3.50
Not in stock
Motorex Automatic Motor Oil (ATF) 450 ml
Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Area of application: Gearbox lubrication with clutch · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
CHF 9.90
CHF 22.00/l
swiing® revival stud bolt set M6 x 106 mm | Puch
Total length: 106 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats SW: 10 mm · Alternative version of the Puch spare part no.: 360.1.10.034.1
CHF 7.40
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Ø inside: 106 mm · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Thickness: 1 mm · Number of fixing points: 4 pcs · Alternative version of the Puch spare part no.: 349.1.10.349.1
CHF 3.90
Collection only possible with online purchase and appointment.
