This gas-nitrided washer is used for the brake anchor plate on your Sachs moped / moped.
The gas-nitrided washer has a small turned shoulder on the inside diameter to enclose the snap ring.
This 7 mm thick shim ring is used for newer rear wheel hubs in which the round part of the brake anchor plate consists of a rolled sheet metal and not a thick metal plate.
In addition, the spider of these wheel hubs was bolted on as standard and not firmly welded as on the older versions.
Ø inner: 10.7 mm
Ø outer: 19 mm
Thickness: 7 mm
Further accessories for your wheel hub, such as the 3.5 mm thick bearing ring, can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Sachs spare part number: F1147
Details
| Manufacturer | swiing® revival parts |
| Thickness | 7 mm |
| Surface | gas nitrided |
| Ø outside | 19 mm |
| Ø inside | 10.7 mm |
Suitable for the following models
| Puch | |
| Sachs | |
| Zündapp Belmondo | |
| Cilo |
Accessories & related products
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Ø inside: 25 mm · Ø outside: 36 mm · Width: 6.8 mm · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard
CHF 7.90
swiing® revival wheel axle M10.5x1 x 175 coaster brake galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Thread type: MF10.5x1 (fine pitch thread) · Thread length: 34 mm · Thread length: 45 mm · Total length: 175 mm
CHF 23.90
swiing® revival wheel nut M10.5x1 x 10 SW17 coaster brake Inox
Material: Chrome steel (stainless steel) · Height: 10 mm · Manufacturer: swiing® revival parts · Surface: blank · Area of application: Standard · Nut type: Hexagon nut 1D · Thread type: MF10.5x1 (fine pitch thread) · Drive: External hexagon · Width across flats SW: 17 mm
CHF 6.90
swiing® revival ball bearing 14/27/6.3 coaster brake driver
Bearing type: Ball ring · Stock number: K1052 · Ø inside: 14 mm · Ø outside: 27 mm · Inner ring width: 7 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Surface: blank
CHF 6.90
Moped fans like you also bought:
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Ø inside: 25 mm · Ø outside: 36 mm · Width: 6.8 mm · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard
CHF 7.90
swiing® revival wheel nut M10.5x1 x 10 SW17 coaster brake Inox
Material: Chrome steel (stainless steel) · Height: 10 mm · Manufacturer: swiing® revival parts · Surface: blank · Area of application: Standard · Nut type: Hexagon nut 1D · Thread type: MF10.5x1 (fine pitch thread) · Drive: External hexagon · Width across flats SW: 17 mm
CHF 6.90
swiing® revival ball bearing 14/27/6.3 coaster brake driver
Bearing type: Ball ring · Stock number: K1052 · Ø inside: 14 mm · Ø outside: 27 mm · Inner ring width: 7 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Surface: blank
CHF 6.90
swiing® revival wheel axle M10.5x1 x 175 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Thread type: MF10.5x1 (fine pitch thread) · Thread length: 34 mm · Thread length: 45 mm · Total length: 175 mm
CHF 29.90
Collection only possible with online purchase and appointment.
