Spacer with the dimensions 16x26x0.20 mm, which is used between the clutches and the clutch basket of mopeds / mopeds with Sachs 502 (Saxonette) AL, AML and 503 AAL, AC & ADV engines.
The shim is hardened, ground and of the highest quality.
This component is also called a shim washer, bearing washer or thrust washer, depending on the terminology used.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | hardened & ground |
| Thickness | 0.2 mm |
| Ø inside | 15.15 mm |
| Ø outside | 25.85 mm |
Suitable for the following models
| Sachs | 502 (Saxonette) - AL, AML 503 - AAL, AC, ADV |
Accessories & related products
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Width: 130 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Thickness: 0.35 mm · Total length: 200 mm · Number of fixing points: 6 pcs · Pony spare part no.: A1888 · Sachs spare part no.: 0250 150 000
CHF 5.40
Motorex Brake Cleaner 750 ml
Manufacturer: Motorex · Area of application: Chemistry · Area of application: Cleaner · Contents [ml]: 750 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS04 - Gas under pressure · Hazard pictogram: GHS07 - Caution dangerous
CHF 24.90
CHF 33.20/l
swiing® revival shim set | Sachs 503, 502, 50/2, 50/3
Manufacturer: swiing® revival parts · Ø inside: 12.5 mm · Ø inside: 15.2 mm · Material: Steel · Surface: blank / oiled · Ø outside: 18 mm · Ø outside: 21 mm · Nominal diameter: 13 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 0.5 mm · Thickness: 1 mm
CHF 16.90
swiing® revival starter disk small | Sachs 503 AC / ADV (A5498)
Ø inside: 23 mm · Manufacturer: swiing® revival parts · Area of application: Standard · Material: Sheet metal (steel) · Material: Silicon carbide · Surface: raw · Number of jaws: 1 pcs · Ø outside: 55 mm · Ø outside: 59 mm · Thickness: 5.2 mm
CHF 39.90
swiing® revival thrust washer 16/26/0.15 clutch | Sachs 502 AL, AML / 503 AAL, AC, ADV (A1691)
Manufacturer: swiing® revival parts · Ø inside: 16.3 mm · Material: Steel · Surface: hardened & ground · Ø outside: 26 mm · Thickness: 0.15 mm · Pony spare part no.: A1691 · Sachs spare part no.: 0246 015 003
CHF 7.90
swiing® revival thrust washer 16/26/0.3 clutch | Sachs 502 AL, AML / 503 AAL, AC, ADV (A1688)
Ø inside: 16.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 26 mm · Thickness: 0.3 mm · Pony spare part no.: A1688 · Sachs spare part no.: 0246 015 000
CHF 7.90
swiing® revival thrust washer 16/26/0.5 clutch | Sachs 502 AL, AML / 503 AAL, AC, ADV (A1689)
Ø inside: 16.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 26 mm · Thickness: 0.5 mm · Pony spare part no.: A1689 · Sachs spare part no.: 0246 015 001
CHF 7.90
swiing® revival thrust washer 16/26/1 clutch | Sachs 502 AL, AML / 503 AAL, AC, ADV (A1690)
Manufacturer: swiing® revival parts · Ø inside: 16.3 mm · Material: Steel · Surface: hardened & ground · Ø outside: 26 mm · Thickness: 1 mm · Pony spare part no.: A1690 · Sachs spare part no.: 0246 015 002
CHF 7.90
Moped fans like you also bought:
swiing® revival thrust washer 16/26/0.15 clutch | Sachs 502 AL, AML / 503 AAL, AC, ADV (A1691)
Manufacturer: swiing® revival parts · Ø inside: 16.3 mm · Material: Steel · Surface: hardened & ground · Ø outside: 26 mm · Thickness: 0.15 mm · Pony spare part no.: A1691 · Sachs spare part no.: 0246 015 003
CHF 7.90
swiing® revival thrust washer 16/26/1 clutch | Sachs 502 AL, AML / 503 AAL, AC, ADV (A1690)
Manufacturer: swiing® revival parts · Ø inside: 16.3 mm · Material: Steel · Surface: hardened & ground · Ø outside: 26 mm · Thickness: 1 mm · Pony spare part no.: A1690 · Sachs spare part no.: 0246 015 002
CHF 7.90
Collection only possible with online purchase and appointment.
