- 30 %
Hot 
12 mm original carburetor suitable for Puch Maxi, Puch X30 Sport NS/NL and Puch X30 Sport NG-2AH as well as other mopeds / mopeds which are originally equipped with a Bing SRE carburetor and have the adjusting screw on the left side of the carburetor (in the direction of travel).
For perfect camouflage, the tuning carburetor is provided with the original number «1/12/197». This means that the carburetor is indistinguishable from the original when fitted.
Installed throttle bodies: 52
Installed throttle body: 2.15 (suitable for M3.5 jets)
Ø connection air filter: 20 mm
Ø connection intake manifold: 20 mm
Maximum tightening torque on the clamping screw: 3-4 Nm
Black-Edition: the carburetor is treated with a heat- & petrol-resistant black coating. Unfortunately, the carburetors have various damaged areas, which have been repaired with a touch-up pen.
You can find suitable jets and an alternative carburetor in the accessories section.
Details
| Color | black |
| Material | Aluminum |
| Surface | coated |
| Area of application | Standard |
| Carburetor type | SRE |
| Choke control | Hand choke |
| Nominal diameter | 12 mm |
| Nozzle thread | M3.5 |
| Nozzle size | 52 |
| Ø Inside entrance | 12 mm |
| Ø Output inside | 12 mm |
| Ø Air filter connection | 20 mm |
| Ø Internal connection | 20 mm |
| Mixed oil connection | No |
| Vacuum connection | No |
| Mounting type | Plug connection clamped |
| Nozzle block | 2.15 |
| Clamping screw torque (max.) | 3 N/m |
Suitable for the following models
| Universal | |
| Puch |
Accessories & related products
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm
CHF 2.80
BING rubber grommet Ø 8 mm carburetor pipe bend
Clamping diameter: 4 mm · Ø inside: 8 mm · Total length: 29 mm · Ø outside: 12 mm · Manufacturer: BING · Material: Rubber · Area of application: Standard · Color: black · Alternative version of the Pony Spare part no.: A1930 · Pony spare part no.: A1952 · Alternative version of Sachs spare part no.: 0260 024 001 · Sachs spare part no.: 0260 125 000
CHF 3.90
BING O-ring Bing SRE & 85, Ø 20 mm
Ø inside: 17.2 mm · Ø outside: 20 mm · Manufacturer: BING · Material: Rubber · Area of application: Standard · Surface: raw · Color: black · Number of components: 1 pcs · Cord thickness: 1.4 mm · Place of use: Carburetor · Pony spare part no.: A4281 · Sachs spare part no.: 0250 160 101
CHF 2.90
Hot
swiing® ingenious 15 mm intake manifold camouflaged (Version 2.0) | Puch E50
Number of fixing points: 2 pcs · Ø inside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Ø External connection: 20 mm · Total length: 46 mm · Hole spacing inlet: 38 mm · Total height: 53 mm · Height flange center hole: 43 mm · Mounting type: Screws
CHF 34.90
swiing® revival choke extension Bing carburetor
Ø inside: 3.25 mm · Total length: 50 mm · Ø outside: 6 mm · Ø outside: 8 mm · Manufacturer: swiing® revival parts · Material: Plastic · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSN · Choke control: Hand choke
CHF 5.90
swiing nozzle set M3.5 (50 - 60) Bing SRE, SRA, SRC, SRF
Total length: 6 mm · Manufacturer: swiing · Material: Brass · Quantity: 11 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60
CHF 21.90
Hot
15 mm carburetor "Black Edition" tuning camouflaged | Puch
Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Surface: coated · Color: black · Nominal diameter: 15 mm · Carburetor type: SRE · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 3 N/m
CHF 64.90
Not in stock
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
CHF 8.50
CHF 9.90
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm
CHF 2.80
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: blue galvanized · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm
CHF 12.90
swiing® revival 12 mm intake manifold | Puch E50
Number of fixing points: 2 pcs · Ø inside: 12 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Area of application: Original · Ø External connection: 20 mm · Total length: 45.5 mm · Hole spacing inlet: 38 mm · Total height: 53 mm · Height flange center hole: 43 mm · Mounting type: Screws
CHF 34.90
Collection only possible with online purchase and appointment.
