38 mm racing cylinder from Airsal suitable for various Puch mopeds
.The cylinder delivers good performance at a low price.
The cooling fins are slightly larger than on the original cylinders, thus providing better cooling.
Details
| Number of fixing points | 4 pcs |
| Manufacturer | Airsal |
| Material | Cast aluminum |
| Camouflaged | No |
| Area of application | Tuning |
| Surface | sandblasted |
| Displacement | 50 ccm |
| Crankshaft stroke | 43 mm |
| Nominal diameter | 38 mm |
| Ø piston pin (B) | 12 mm |
| Ø cylinder neck | 48 mm |
| Ø outlet inside | 22 mm |
| Hole spacing inlet | 38 mm |
| Inlet window | 24 / 20 x 14 |
| Hole pattern [mm] | 44 x 44 |
| Thread inlet | M6x1 (standard thread) |
| Decompressor | Yes |
| Outlet type | straight |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Number of fixing points: 4 pcs · Total length: 135 mm · Manufacturer: GPO · Width: 125 mm · Height: 55 mm · Material: Aluminum · Area of application: Standard · Surface: sandblasted · Ø cylinder: 38 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No
CHF 32.90
Airsal piston 38 mm | Puch
Manufacturer: Airsal · Nominal diameter: 38 mm · Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.3 mm · Curvature (D): 3.8 mm · Total piston height (E): 52.5 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.6 mm
CHF 43.90
Not in stock
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Ø inside: 12 mm · Ø outside: 15 mm · Manufacturer: swiing® ingenious parts · Width: 14.2 mm · Bearing cage: Silver cage · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony Spare part no.: A4222 · Tomos spare part no.: 035548 · Alternative version of Sachs spare part no.: 0232 157 001
CHF 11.90
Moped fans like you also bought:
Clutch 3-jaw (aluminum) | Puch E50
Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Material: Aluminum · Area of application: Original · Area of application: Standard · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.9 mm
CHF 49.90
swiing® revival snap ring low control bearing set (version 2.0)
Manufacturer: swiing® revival parts · Height: 7 mm · Material: Spring steel · Surface: blank · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Thickness: 0.6 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
CHF 2.50
Starter cable Puch Maxi Ø 1.5 mm x 160 cm
Ø nipple: 8 mm · Nipple length: 12 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Cable length: 1600 mm
CHF 2.80
GPO cylinder stud bolt set special M6x106 mm galvanized | Puch
Drive: External hexagon · Width across flats SW: 10 mm · Total length: 106 mm · Diameter: 7 mm · Manufacturer: GPO · Material: Steel · Surface: blue galvanized · Thread type: M6x1 (standard thread) · Thread length: 15 mm · Thread length: 19 mm · Strength class: 10 · Strength class: 10.9 · Alternative version of the Puch spare part no.: 360.1.10.034.1
CHF 19.80
Collection only possible with online purchase and appointment.
